Genuine Omega Spring Bars

Click Here for the main Omega page.
We have no information by model name or date.

After 85 years of supplying Omega watch parts the Swatch Monopoly which controls Omega will no longer sell us or any other Independent Watch Parts Distributor in the World. The Spring bars on this page are the only Omega genuine spring bars we can supply. See the page http://www.ofrei.com/page475.html for a complete listing of generic spring bars that are just as good at a fraction of an Omega bar.

100% Stainless Steel these Swiss made spring bars are assembled by hand in a small village in Switzerland. When you want the best spring bars in the world made from the best materials, then you buy these Swiss made bars. Double Flange Spring Bar fit 19 mm case lug. Bar diameter is 1.8 mm, which is considered the standard thickness and should be used when a 2.0 mm diameter bar is too thick to go the thru pipe on metal bracelet. The pivot diameter past the double flange tip is 0.90 mm and the length is 1.0 mm Certain Omega 20 Bracelets that only lift out the back actually use a 19 mm Spring Bar instead of a standard 20 mm. Example of bracelet that lifts out only from backside and requires both ends of bar compressed in at same time.

FB-7882

 

Quantity	1 - 2	3 - 11	12 - 49	50 - 99	100+
Price	$2.80	$2.25	$1.90	$1.65	$1.09

100% Stainless Steel these Swiss made spring bars are assembled by hand in a small village in Switzerland. When you want the best spring bars in the world made from the best materials, then you buy these Swiss made bars. Double Flange Spring Bar fit 21 mm case lug. Bar diameter is 1.8 mm, which is considered the standard thickness and should be used when a 2.0 mm diameter bar is too thick to go the thru pipe on metal bracelet. The pivot diameter past the double flange tip is 0.90 mm and the length is 1.0 mm

FB-7884
$2.80

 

Quantity	1 - 2	3 - 11	12 - 49	50 - 99	100+
Price	$2.80	$2.25	$1.90	$1.65	$1.09

100% Stainless Steel these Swiss made spring bars are assembled by hand in a small village in Switzerland. When you want the best spring bars in the world made from the best materials, then you buy these Swiss made bars. Double Flange Spring Bar fit 20 mm case lug. Bar diameter is 1.8 mm, which is considered the standard thickness and should be used when a 2.0 mm diameter bar is too thick to go the thru pipe on metal bracelet. The pivot diameter past the double flange tip is 0.90 mm and the length is 1.0 mm

FB-7883

 

Quantity	1 - 2	3 - 11	12 - 49	50 - 99	100+
Price	$2.80	$2.25	$1.90	$1.65	$1.09

100% Stainless Steel these Swiss made spring bars are assembled by hand in a small village in Switzerland. When you want the best spring bars in the world made from the best materials, then you buy these Swiss made bars. Double Flange Spring Bar fit 22 mm case lug. Bar diameter is 1.8 mm, which is considered the standard thickness and should be used when a 2.0 mm diameter bar is too thick to go the thru pipe on metal bracelet. The pivot diameter past the double flange tip is 0.90 mm and the length is 1.0 mm "Beware" Do not buy these bars if you want easy bars to remove! Indeed, they are made to fit 22 mm lug size and that they do. However, these are 27 mm end to end bars when fully opened and fit snugly (nice and tight) in a 22 mm lug space. Once in place some people might find them to be especially difficult when trying to remove them. While, this may cause trouble some I have to say I was told 30 years ago by a very respected watchmaker of his time, and again yesterday by the most honored watchmaker visiting our store alive at this time that..."a hard to remove springs bars is a good thing...and that cutting them out is something they do on a regular basis after installing for safety an extra large bar in the first place". I have been able to install this bar in a 22 lug size case without a strap and then remove the bar in 4 seconds. Off course I do not install and remove spring bars for a living, however I have been doing it for 44 years now and have had a lot changes to practice this task. We are pleased to be able to offer you these high quality Swiss Made hard to remove 22 mm spring bars FB-7885 otherwise known as (Horotec #MSA46.220-22.0, Bergeon 2725-M180-22). Sincerely, Bob Frei

FB-7885

 

Quantity	1 - 2	3 - 11	12 - 49	50 - 99	100+
Price	$2.80	$2.25	$1.90	$1.65	$1.09

This Bergeon Tool 6825 was designed to help with the installation of new modern bracelets like those made by Omega and a few others. You can search the web and find it selling at other site at $189.00 and even $199.00, while our 93 years celebration price is only $182.50 Does not work on Rolex® Bracelets, for those use the First-Quality Spring Bar Tool, the Bergeon 6825-PF with fine fork tips and now the Bergeon 7825 Extra Fine Forked Tweezers to Fit Spring Bars is considered the best for the R brand. Otto Frei, www.ofrei.com is not affilated or sponsored by Rolex® Watch U.S.A Place spring bar in the bracelet, compress the spring bar with the tool, lock it, then put the bracelet in place and release and lift the pliers. The width adjusts from 10 to 30 mm and locks by turning a screw. The tool has notches for positioning of the forks from 0 to 45 degree angle for easy of use. Stainless steel forks that come with these pliers are reversible, 1.3 mm fork opening, thickness at tip end .33 mm, and tube body diameter 1.65 mm. (Does not come with optional BERG-6825FF tips) Bergeon 6825

BERG-6825
$182.50
 

OME-124ST3256
$10.60
 

Great Assortment of 101 Spring Bars for only four dollars and ninety five cents! This assortment contains a mixture of different, types, thickness, and sizes which will allow you to get started replacing spring bars right away without making a big investment. Spring Bar Tool not included.

SB-ASST-BULK101
$6.95