Otto Frei.
Quality Jewelry Supplies for Generations - Since 1930
Contact UsHome Search for Products About Us

Horotec Crystal Press & Case Closers With Screw-on Dies

   

Horotec Rack Press for Threaded Dies With Screw Control, Without Dies

For All Horotec and Bergeon Thread-on Dies

If you already have Bergeon threaded dies or want to select Horotec assortments of screw on threaded nylon dies below on this page and want a first class press then you should buy this model. The lever on the MSA06.150 places the dies in close position, then you lock it in place and screw the knob to slowly lower the dies.

You can use any screw-on Bergeon style die with this Press.

MSA06.150
$465.00

order.gif  checkout.gif

   

Horotec Snap Back Case Closer With Threaded Screw Control & Screw on Delrin Dies

Strong & Safe, for snap back case closing or pressing in mineral glass crystals with threaded screw action. Comes with 9 screw on nylon dies total, 7 are double sided, 1 is single sided and 1 is the universal die.

The sizes for the double sided dies are: 19 mm X 21 mm, 22 mm X 25 mm, 26 mm x 29 mm, 30 mm x 33 mm, 34 mm x 37 mm, 38 mm x 41 mm, and 42 mm X 45 mm. The sizes for the single sided die is 17 mm and the universal die is 45 mm. The dimensions of the press with handle screwed down to the bottom are:height: 4 1/4", Length: 3 1/8", Depth: 2 3/8"(107x80x60 mm). The threaded shaft is about 2 1/4" (56 mm) long. This is a quality tool ideal for the shop with limited space that does an occasional battery change.

MSA 07.105
$189.00

order.gif  checkout.gif

   

Horotec Heavy Duty Swiss Made Crystal Press With 43 Thread On Delrin Dies

The MSA06.135 press is packaged with 43 screw-on threaded metal center delrin nylon dies. Everything you need to replace bezels, snap case backs closed, and install mineral crystals, waterproof tension ring and divers crystals. The MSA06.135 press does not have the screw control found on the MSA06.150 press with screw control. This is a very good strong, heavyweight press with strong solid lever handled.

MSA06.136
$769.00

order.gif  checkout.gif

   

Horotec Set of 9 Thread On Delrin Dies for Closing Snap-on Case Backs

Horotec set of 8 Reversible thread on Delrin Dies for closing snap-on case backs and 1 universal die. Die diameters: 17 mm, 19 x 21 mm, 22 x 25 mm, 26 x 29 mm, 30 x 33 mm, 34 x 37 mm, 38 x 41 mm, 42 x 45 mm, and a 45 mm universal die. All Horotec thread-on dies will work with the Bergeon 5500 Press.



MSA07.106
$109.95

order.gif  checkout.gif

   

Set of 8 Delrin Thread-on Dies for Fitting Flat Mineral Crystals

The Horotec Delrin dies are now available with treaded brass centers. This set contains 7 Reversible Delrin Thread-On Dies for fitting flat mineral crystals and 1 universal die. Die diameters: 16 mm, 22 x 17 mm, 28 x 23 mm, 34 x 29 mm, 40 x 35 mm, 46 x 41 mm. Also included is a special 35 mm die for installing magnifying lens crystals and a 45 mm universal die. All Horotec thread-on dies will work with the Bergeon 5500 Press.



MSA06.520
$74.95

order.gif  checkout.gif

   

Horotec Heavy Duty Press Without Dies

The Horotec Heavy Duty Press for Screw on threaded dies. Stable precision press, equipped with a head and a massive aluminium base mounted on two robust steel columns. The frontal "V" shape part is engineered to allow the glass fitting without removing the extensible bracelets. The steel axle slides freely in a self lubricated sleeve for maximum precision: this is essential for fitting back cases, glasses or bezels without scratching. The end of the threaded axle (diameter 6.0 mm) is specially made for screwing all dies in a perfect horizontal position. Changing dies becomes easier. The lever covered with an anti-skid rubber and equipped with a return spring which allows a fine control of fitting pressure. Size: 80mm x 225mm x 180mm.

MSA06.135
$309.95

order.gif  checkout.gif

   

Set of 11 Delrin Thread-On Dies for Fitting Watch Bezels

10 Reversible Thread-On Delrin Dies for fitting watch bezels and 1 universal die. Die diameters: 25 x 26 mm, 27 x 28 mm, 29 x 30 mm, 31 x 32 mm, 33 x 33.5 mm, 34 x 34.5 mm, 35 x 35.5 mm, 36 x 36.5 mm, 37 x 37.5 mm, 38 x 38.5 mm, and a 45 mm universal die. All Horotec thread-on dies will work with the Bergeon 5500 Press.



MSA06.521
$118.00

order.gif  checkout.gif

   

Horotec Set of 5 Jumbo Size Delrin Thread-On Dies for Fitting Crystals with Tension Ring

5 Reversible Thread-On Delrin Dies for fitting crystals with tension ring. Die diameters: 42 x 45 mm, 47 x 50 mm, 52 x 55 mm, 57 x 60 mm, and 62 x 65 mm. Tapered wall reversible dies with inner side wall depth of 1.5mm. All Horotec thread-on dies will work with the Bergeon 5500 Press.


MSA06.523
$78.50

order.gif  checkout.gif

   

Horotec 07.130 Multi-Press for Snap-on and Screw-on Dies

Press Only, dies not included. Interchangeable with snap-on and screw-on dies.

Horotec's new answer for those would have both the original snap on dies and the threaded dies introduce a few years ago. The bits on the top and bottom that holds the dies is reversible and allows for the use of both the snap on and treaded dies.

MSA07.130
$149.95

order.gif  checkout.gif

   
Adapter bit for MSA 06.150

Comes with one fixing screw MSA 07.105-V

MSA 07.105-A
$29.50

order.gif  checkout.gif


   

Set of 6 Delrin Quick Change Snap on Dies for Closing Snap-on Case Backs

A set of 6 Reversible Snap On Delrin Dies for closing snap-on case backs. Die diameters: 20 x 23 mm, 26 x 29 mm, 32 x 35 mm, 29 mm, 35 mm, and a 40 mm. Some people prefer to us snap on dies instead of thread on dies for quick change feature of the snap-on dies.

MSA07.111
$58.20

order.gif  checkout.gif

   

Set of 6 Rectangular Nylon Screw on Dies

Set comes with 6 rectangular dies sizes, exterior length x interior length x width: 23.8 x 13 x 13, 28.8 x 18 x 16, 33.8 x 23 x 19, 38.8 x 28 x 22, 43.8 x 33 x 25 and 48.8 x 38 x 28 mm. Interchangeable with Bergeon Crystal Press 5500A, 5500C and Horotec Screw-on Crystal Presses.

MSA06.530
$49.95

order.gif  checkout.gif

 

Individual Sizes, Horotec Screw-on Delrin Dies

Click Here for Individual Sizes of Horotec Delrin Dies
   

The Original Horotec Rack Press With Screw Control, Boxed Set w/43 Thread-on Nylon Dies

If you like to use nylon dies and want a first class press then you should buy this model. The lever on the MSA06.150 places the dies close to final position, then you lock the lever in place and screw the knob to slowly lower the dies to gently close case back or press in crystal. The Screw Control eliminates the pushing to hard of the handle, which can happen when using any traditional lever only presses. This is a great tool!

The complete kit comes with the press MSA06.150 which uses the new Horotec Delrim dies with threaded metal centers which screw on the press, 4 sets of dies numbers MSA 06.522, MSA06.521, MSA06.520 and MSA07.106. The Thread-on Horotec Dies will work on the Bergeon 5500 press and all Bregeon dies will also will on all thread on Horotec presses.

Special order item. Please allow 4-6 weeks for delivery.

MSA06.152
$1,229.95

order.gif  checkout.gif

   

Horotec Set of 12 Quick Change Snap On Delrin Dies for Fitting Bezels on Divers Watches

Outfit your shop with these quick change snap of set of 12 Reversible Delrin Dies for fitting watch bezels. Die diameters: 38 x 38.5 mm, 37 x 37.5 mm, 36 x 36.5 mm, 35 x 35.5 mm, 34 x 34.5 mm, 33 x 33.5 mm, 32 x 32.5 mm, 30 x 31 mm, 28 x 29 mm, 26 x 27 mm, 24 x 25 mm, and 22.5 x 23 mm.

Compatible with MSA07.110, MSA07.150, MSA07.151, and MSA07.152.

MSA06.505
$84.50

order.gif  checkout.gif

   

Horotec Set of 5 Special Big Size Thread on Delrin Dies

These 5 Horotec Thread on Delrin Dies are for special big size watches popular in recent years.

The Set includes: 2 Reversible Delrin Dies for fitting watch bezels (40 x 45 mm and 46 x 50 mm); inner side wall depth is 4mm.
1 Reversible Delrin Die for fitting flat mineral crystals (47 x 50 mm).
2 Reversible Delrin Dies for closing snap-on case backs (46 x 48 mm and 49 x 50 mm); inner side wall depth is 2.75mm. A great addition to anyone's set of dies if they own either the Bergeon or the Horotec thread on die presses.


MSA07.107
$74.95

order.gif  checkout.gif

   

Set of 15 Delrin Thread-On Dies for Fitting Crystal with Tension Rings

14 Reversible Thread-On Delrin Dies for fitting crystals with tension ring and 1 universal die. Die diameters: 15 mm, 16 x 17 mm, 18 x 19 mm, 20 x 21 mm, 22 x 23 mm, 24 x 25 mm, 26 x 27 mm, 28 x 29 mm, 30 x 31 mm, 32 x 33 mm, 34 x 35 mm, 36 x 37 mm, 38 x 39 mm, 40 x 41 mm, and a 45 mm universal die. All Horotec thread-on dies will work with the Bergeon 5500 Press.



MSA06.522
$183.95

order.gif  checkout.gif

   

Horotec Set of 4 Jumbo Size Delrin Thread-On Dies for Fitting Flat Mineral Crystals

This set contains 4 jumbo size reversible delrin thread-on dies for fitting flat mineral crystals. Die diameters: 47 x 50 mm, 52 x 55 mm, 57 x 60 mm, and 62 x 65 mm. All Horotec thread-on dies will work with the Bergeon 5500 Press.


MSA06.524
$59.60

order.gif  checkout.gif

   

Horotec 07.160 Multi-Press with Clutch Handle for Snap-on and Screw-on Dies

Press with bits to fit Horotec dies, dies not included. Interchangeable with snap-on and screw-on dies.

This newly designed Multi-Press handles both the original snap on dies and the threaded dies. The bits on the top and bottom that holds the dies is reversible and allows for the use of both the snap on and treaded dies. The clutch handle's ease of use allows rapid succession of accomplishing the task at hand.

MSA07.160
$495.00

order.gif  checkout.gif

   
Fixing Screw for MSA 07.105-A

MSA 07.105-V
$2.50

order.gif  checkout.gif


   

Sternkreuz Nr. 98 Die Set

Now you need dies for your new QuickPress 800. These German-made dies are perfect match, from 17.5 - 46 mm, with four special plastic dies for mineral glass and fancy shaped crystals.

FB-2205
$586.00

order.gif  checkout.gif

   

Horotec Set of 5 Monster Size Thread on Delrin Dies

These 5 Horotec Thread on Delrin Dies are for monster size watches popular in recent years.

The Set includes 5 Reversible Delrin Dies for closing snap-on case backs (46 x 48 mm, 49 x 50 mm, 52 x 55 mm, 57 x 60 mm, and 62 x 65 mm); inner side wall depth is 3mm. A great addition to anyone's set of dies if they own either the Bergeon or the Horotec thread on die presses.


MSA07.108
$79.95

order.gif  checkout.gif

   

Horotec Set of 5 Jumbo Size Delrin Thread-On Dies for Fitting Watch Bezels

Five Horotec Jumbo Size Reversible Thread-On Delrin Dies for fitting watch bezels. Die diameters: 40 x 45 mm, 46 x 50 mm, 52 x 55 mm, 57 x 60 mm, and 62 x 65 mm. All Horotec thread-on dies will work with the Bergeon 5500 Press.


MSA06.525
$79.95

order.gif  checkout.gif

   

Set of 6 Delrin Quick Change Snap on Dies for Closing Large Size Snap-on Case Backs

A set of 6 Snap On Delrin Dies for closing large size snap-on case backs. Reversible Die diameters: 55 x 52 mm, 57 x 60 mm, 62 x 65 mm, 55 mm, 60 mm, and a 65 mm. Some people prefer to use snap on dies instead of thread on dies for quick change feature of the snap-on dies.

MSA07.113
$84.95

order.gif  checkout.gif

   

Rack Press with 9 Reversible Aluminum Screw-on Dies

Set comes with 9 Tapered Side-Wall Reversible Aluminum Screw-on Dies from 18 mm to 35 mm.

Reversible die sizes in millimeters 18/19, 20/21, 22/23, 24/25, 26/27, 28/29, 30/31, 32/33, 34/35, and one universal flat platform die, 4 threaded dies supports of different heights, allowing for use with all sizes and types of Bergeon and Horotec screw-on dies. Rack Press and Dies comes with a mountable wooden base.

FB-T148
$289.00

order.gif  checkout.gif

   

Horotec Snap Back Case Closer With Threaded Screw Control & Snap on Delrin Dies

Strong & Safe, for snap back case closing or pressing in mineral glass crystals with threaded screw action Comes with 6 snap on nylon dies dies total, 3 are double sided and 3 are single sided.

The sizes for the double sided dies are: 20 mm X 23 mm, 26 mm X 29 mm, and 32 mm X 35 mm. The sizes for the single sided dies are 29 mm, 35 mm, and 40 mm. The dimensions of the press with handle screwed down to the bottom are:height: 4 1/4", Length: 3 1/8", Depth: 2 3/8"(107x80x60 mm). The threaded shaft is about 2 1/4" (56 mm) long. This is a quality tool ideal for the shop with limited space that does an occasional battery change and has as an aversion to cheap tools.

MSA07.110
$119.00

order.gif  checkout.gif

   

Set of 12 Delrin Thread-On Dies for Fitting Very Domed Crystals

12 Reversible Thread-On Delrin Dies for fitting very domed watch crystals. Die diameters: 18 mm, 20 mm, 24 mm, 28 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, and 65 mm. Reversible dies are domed in one side and flat on the other. Works on small, normal and jumbo sized crystals. All Horotec thread-on dies will work with the Bergeon 5500 Press.


MSA06.526
$158.00

order.gif  checkout.gif

   

Sternkreuz German Made Die Set

Set of 20 thrust pieces, 3 steel supports for tapered dies, and 3 plastic dies for mineral crystals.

FB-2206
$489.00

order.gif  checkout.gif

   
Large Horotec Snap Back Case Closer With Threaded Screw Control with 8 Snap On Delrin Dies

Same size as the Large Screw Press shown above. This new large model comes with 8 quick change snap on Delrin dies for closing snap back cases. One side of these dies are hollow with flat side walls and the other is flat. It is possible to use these dies for some crystal fittings as well.

Die sizes are 20 mm X 23 mm, 26 mm X 29 mm, 32 mm X 35 mm, 35 mm X 40 mm, 29 mm, 35 mm, and 39 mm. The dimensions are of the press with handle screwed down to the bottom: Height: 5 3/8", Length: 3 3/4", Depth: 2 15/16" (137x95x75 mm). The threaded shaft is about 2 9/16" (65 mm) long.

MSA07.151
$171.50

order.gif  checkout.gif


www.ofrei.com
Otto Frei, Watch Parts Since 1930
Customers Entrance
126 2nd St. Oakland, California 94607
Mailing Address: PO BOX 796, Oakland Ca. 94604
Freight Shipment Address: 119 3rd St. Oakland Ca. 94607 USA


Home   |  About Us   |  Specials   |  Contact Us   |  Search

Click here to send email

For stock checks on watch parts not listed on the site please call the watch material department at 510-832-0355 ext 2., Monday to Friday 9 AM to 5 PM Pacific Standard Time Zone.
Stock Checks For Watch Movement & Watch Case Parts

Security/Privacy/Return Policy

United States
510.832.0355 EXT. 2
800.900.3734 (fax)

International
510.832.0355 EXT. 2
510.834.6217 (fax)