Set of 8 Delrin Thread-on Dies for Fitting Flat Mineral Crystals | |
The Horotec Delrin dies are now available with treaded brass centers. This set contains 7 Reversible Delrin Thread-On Dies for fitting flat mineral crystals and 1 universal die. Die diameters: 16 mm, 22 x 17 mm, 28 x 23 mm, 34 x 29 mm, 40 x 35 mm, 46 x 41 mm. Also included is a special 35 mm die for installing magnifying lens crystals and a 45 mm universal die. All Horotec thread-on dies will work with the Bergeon 5500 Press.
| |
MSA06.520
$119.95
|
16 MM Delrin Die for Fitting Flat Mineral Crystals| |
16 mm Horotec screw-on Delrin Die for fitting flat mineral crystals.
| |
MSA06.520-16
$14.90
|
22 x 17 MM Delrin Die for Fitting Flat Mineral Crystals| |
22 x 17 mm Horotec screw-on Delrin Die for fitting flat mineral crystals.
Reversible die is 22 mm diameter on one side and is 17 mm on the other.
| |
MSA06.520-2217
$14.90
|
28 x 23 MM Delrin Die for Fitting Flat Mineral Crystals| |
28 x 23 mm Horotec screw-on Delrin Die for fitting flat mineral crystals.
Reversible die is 28 mm diameter on one side and is 23 mm on the other.
| |
MSA06.520-2823
$14.90
|
34 x 29 MM Delrin Die for Fitting Flat Mineral Crystals| |
34 x 29 mm Horotec screw-on Delrin Die for fitting flat mineral crystals.
Reversible die is 34 mm diameter on one side and is 29 mm on the other.
| |
MSA06.520-3429
$14.90
|
40 x 35 MM Delrin Die for Fitting Flat Mineral Crystals| |
40 x 35 mm Horotec screw-on Delrin Die for fitting flat mineral crystals.
Reversible die is 40 mm diameter on one side and is 35 mm on the other.
| |
MSA06.520-4035
$14.90
|
46 x 41 MM Delrin Die for Fitting Flat Mineral Crystals| |
46 x 41 mm Horotec screw-on Delrin Die for fitting flat mineral crystals.
Reversible die is 46 mm diameter on one side and is 41 mm on the other.
| |
MSA06.520-4641
$16.90
|
35 MM Delrin Die for Fitting Flat Mineral Crystals with Magnifying Lens| |
35 mm Horotec screw-on Delrin Die for fitting flat mineral glass crystals with magnifying lens.
| |
MSA06.520-A
$14.90
|
Set of 11 Delrin Thread-On Dies for Fitting Watch Bezels| |
10 Reversible Thread-On Delrin Dies for fitting watch bezels and 1 universal die. Die diameters: 25 x 26 mm, 27 x 28 mm, 29 x 30 mm, 31 x 32 mm, 33 x 33.5 mm, 34 x 34.5 mm, 35 x 35.5 mm, 36 x 36.5 mm, 37 x 37.5 mm, 38 x 38.5 mm, and a 45 mm universal die. All Horotec thread-on dies will work with the Bergeon 5500 Press.
| |
MSA06.521
$159.95
|
25 x 26 MM Delrin Die for Fitting Watch Bezels| |
25 x 26 mm Horotec screw-on Delrin Die for fitting watch bezels.
Reversible die is 25 mm diameter on one side and is 26 mm on the other
| |
MSA06.521-2526
$16.85
|
27 x 28 MM Delrin Die for Fitting Watch Bezels| |
27 x 28 mm Horotec screw-on Delrin Die for fitting watch bezels.
Reversible die is 27 mm diameter on one side and is 28 mm on the other
| |
MSA06.521-2728
$16.85
|
29 x 30 MM Delrin Die for Fitting Watch Bezels| |
29 x 30 mm Horotec screw-on Delrin Die for fitting watch bezels.
Reversible die is 29 mm diameter on one side and is 30 mm on the other
| |
MSA06.521-2930
$16.85
|
31 x 32 MM Delrin Die for Fitting Watch Bezels| |
31 x 32 mm Horotec screw-on Delrin Die for fitting watch bezels.
Reversible die is 31 mm diameter on one side and is 32 mm on the other
| |
MSA06.521-3132
$16.85
|
33 x 33.5 MM Delrin Die for Fitting Watch Bezels| |
33 x 33.5 mm Horotec screw-on Delrin Die for fitting watch bezels.
Reversible die is 33 mm diameter on one side and is 33.5 mm on the other
| |
MSA06.521-3333
$16.85
|
34 x 34.5 MM Delrin Die for Fitting Watch Bezels| |
34 x 34.5 mm Horotec screw-on Delrin Die for fitting watch bezels.
Reversible die is 34 mm diameter on one side and is 34.5 mm on the other
| |
MSA06.521-3434
$16.85
|
35 x 35.5 MM Delrin Die for Fitting Watch Bezels| |
35 x 35.5 mm Horotec screw-on Delrin Die for fitting watch bezels.
Reversible die is 35 mm diameter on one side and is 35.5 mm on the other
| |
MSA06.521-3535
$16.85
|
36 x 36.5 MM Delrin Die for Fitting Watch Bezels| |
36 x 36.5 mm Horotec screw-on Delrin Die for fitting watch bezels.
Reversible die is 36 mm diameter on one side and is 36.5 mm on the other
| |
MSA06.521-3636
$16.85
|
37 x 37.5 MM Delrin Die for Fitting Watch Bezels| |
37 x 37.5 mm Horotec screw-on Delrin Die for fitting watch bezels.
Reversible die is 37 mm diameter on one side and is 37.5 mm on the other
| |
MSA06.521-3737
$16.85
|
38 x 38.5 MM Delrin Die for Fitting Watch Bezels| |
38 x 38 mm Horotec screw-on Delrin Die for fitting watch bezels.
Reversible die is 38 mm diameter on one side and is 38.5 mm on the other
| |
MSA06.521-3838
$16.85
|
Set of 15 Delrin Thread-On Dies for Fitting Crystal with Tension Rings| |
14 Reversible Thread-On Delrin Dies for fitting crystals with tension ring and 1 universal die. Die diameters: 15 mm, 16 x 17 mm, 18 x 19 mm, 20 x 21 mm, 22 x 23 mm, 24 x 25 mm, 26 x 27 mm, 28 x 29 mm, 30 x 31 mm, 32 x 33 mm, 34 x 35 mm, 36 x 37 mm, 38 x 39 mm, 40 x 41 mm, and a 45 mm universal die. All Horotec thread-on dies will work with the Bergeon 5500 Press.
| |
MSA06.522
$296.00
|
15 MM Delrin Die for Fitting Crystals with Tension Ring| |
15 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
| |
MSA06.522-1617
$14.90
|
16 x 17 MM Delrin Die for Fitting Crystals with Tension Ring| |
16 x 17 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
Reversible die is 16 mm diameter on one side and is 17 mm on the other
| |
MSA06.522-1617
$14.90
|
18 x 19 MM Delrin Die for Fitting Crystals with Tension Ring| |
18 x 19 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
Reversible die is 18 mm diameter on one side and is 19 mm on the other
| |
MSA06.522-1819
$14.90
|
20 x 21 MM Delrin Die for Fitting Crystals with Tension Ring| |
20 x 21 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
Reversible die is 20 mm diameter on one side and is 21 mm on the other
| |
MSA06.522-2021
$14.90
|
22 x 23 MM Delrin Die for Fitting Crystals with Tension Ring| |
22 x 23 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
Reversible die is 22 mm diameter on one side and is 23 mm on the other
| |
MSA06.522-2223
$14.90
|
24 x 25 MM Delrin Die for Fitting Crystals with Tension Ring| |
24 x 25 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
Reversible die is 24 mm diameter on one side and is 25 mm on the other
| |
MSA06.522-2425
$14.90
|
26 x 27 MM Delrin Die for Fitting Crystals with Tension Ring| |
26 x 27 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
Reversible die is 26 mm diameter on one side and is 27 mm on the other
| |
MSA06.522-2627
$14.90
|
28 x 29 MM Delrin Die for Fitting Crystals with Tension Ring| |
28 x 29 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
Reversible die is 28 mm diameter on one side and is 29 mm on the other
| |
MSA06.522-2829
$14.90
|
30 x 31 MM Delrin Die for Fitting Crystals with Tension Ring| |
30 x 31 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
Reversible die is 30 mm diameter on one side and is 31 mm on the other
| |
MSA06.522-3031
$14.90
|
32 x 33 MM Delrin Die for Fitting Crystals with Tension Ring| |
32 x 33 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
Reversible die is 32 mm diameter on one side and is 33 mm on the other
| |
MSA06.522-3233
$14.90
|
34 x 35 MM Delrin Die for Fitting Crystals with Tension Ring| |
34 x 35 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
Reversible die is 34 mm diameter on one side and is 35 mm on the other
| |
MSA06.522-3435
$14.90
|
36 x 37 MM Delrin Die for Fitting Crystals with Tension Ring| |
36 x 37 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
Reversible die is 36 mm diameter on one side and is 37 mm on the other
| |
MSA06.522-3637
$14.90
|
38 x 39 MM Delrin Die for Fitting Crystals with Tension Ring| |
38 x 39 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
Reversible die is 38 mm diameter on one side and is 39 mm on the other
| |
MSA06.522-3839
$14.90
|
40 x 41 MM Delrin Die for Fitting Crystals with Tension Ring| |
40 x 41 mm Horotec screw-on Delrin Die for fitting crystals with tension ring.
Reversible die is 40 mm diameter on one side and is 41 mm on the other
| |
MSA06.522-4041
$14.90
|
Horotec Set of 9 Thread On Delrin Dies for Closing Snap-on Case Backs| |
Horotec set of 8 Reversible thread on Delrin Dies for closing snap-on case backs and 1 universal die. Die diameters: 17 mm, 19 x 21 mm, 22 x 25 mm, 26 x 29 mm, 30 x 33 mm, 34 x 37 mm, 38 x 41 mm, 42 x 45 mm, and a 45 mm universal die. All Horotec thread-on dies will work with the Bergeon 5500 Press.
| |
MSA07.106
$126.31
|
17 MM Delrin Die for Closing Snap-on Case Backs| |
17 mm Horotec screw-on Delrin Die for closing snap-on case backs.
| |
MSA07.106-17
$16.25
|
19 x 21 MM Delrin Die for Closing Snap-on Case Backs| |
19 x 21 mm Horotec screw-on Delrin Die for closing snap-on case backs.
Reversible die is 19 mm diameter on one side and is 21 mm on the other.
| |
MSA07.106-1921
$16.25
|
22 x 25 MM Delrin Die for Closing Snap-on Case Backs| |
22 x 25 mm Horotec screw-on Delrin Die for closing snap-on case backs.
Reversible die is 22 mm diameter on one side and is 25 mm on the other.
| |
MSA07.106-2225
$16.25
|
26 x 29 MM Delrin Die for Closing Snap-on Case Backs| |
26 x 29 mm Horotec screw-on Delrin Die for closing snap-on case backs.
Reversible die is 26 mm diameter on one side and is 29 mm on the other.
| |
MSA07.106-2629
$16.25
|
30 x 33 MM Delrin Die for Closing Snap-on Case Backs| |
30 x 33 mm Horotec screw-on Delrin Die for closing snap-on case backs.
Reversible die is 30 mm diameter on one side and is 33 mm on the other.
| |
MSA07.106-3033
$16.25
|
34 x 37 MM Delrin Die for Closing Snap-on Case Backs| |
34 x 37 mm Horotec screw-on Delrin Die for closing snap-on case backs.
Reversible die is 34 mm diameter on one side and is 37 mm on the other.
| |
MSA07.106-3437
$16.25
|
38 x 41 MM Delrin Die for Closing Snap-on Case Backs| |
38 x 41 mm Horotec screw-on Delrin Die for closing snap-on case backs.
Reversible die is 38 mm diameter on one side and is 41 mm on the other.
| |
MSA07.106-3841
$16.25
|
42 x 45 MM Delrin Die for Closing Snap-on Case Backs| |
42 x 45 mm Horotec screw-on Delrin Die for closing snap-on case backs.
Reversible die is 42 mm diameter on one side and is 45 mm on the other.
| |
MSA07.106-4245
$18.35
|
45 MM Universal Horotec Screw-on Delrin Die| |
45 mm Universal Horotec screw-on Delrin Die.
| |
MSA07.106-U
$23.20
|
Horotec Set of 5 Special Big Size Thread on Delrin Dies| |
These 5 Horotec Thread on Delrin Dies are for special big size watches popular in recent years. The Set includes: 2 Reversible Delrin Dies for fitting watch bezels (40 x 45 mm and 46 x 50 mm); inner side wall depth is 4mm.
1 Reversible Delrin Die for fitting flat mineral crystals (47 x 50 mm).
2 Reversible Delrin Dies for closing snap-on case backs (46 x 48 mm and 49 x 50 mm); inner side wall depth is 2.75mm. A great addition to anyone's set of dies if they own either the Bergeon or the Horotec thread on die presses.
| |
MSA07.107
$136.48
|
47 x 50 MM Delrin Die for Fitting Flat Mineral Crystals| |
47 x 50 mm Horotec screw-on Delrin Die for fitting flat mineral crystals.
Reversible die is 47 mm diameter on one side and is 50 mm on the other.
| |
MSA06.520-4750
$18.50
|
40 x 45 MM Delrin Die for Fitting Watch Bezels| |
40 x 45 mm Horotec screw-on Delrin Die for for fitting watch bezels.
Reversible die is 40 mm diameter on one side and is 45 mm on the other
| |
MSA06.521-4045
$21.30
|
46 x 50 MM Delrin Die for Fitting Watch Bezels| |
46 x 50 mm Horotec screw-on Delrin Die for fitting watch bezels.
Reversible die is 46 mm diameter on one side and is 50 mm on the other
| |
MSA06.521-4650
$21.30
|
46 x 48 MM Delrin Die for Closing Snap-on Case Backs| |
46 x 48 mm Horotec screw-on Delrin Die for closing snap-on case backs.
Reversible die is 46 mm diameter on one side and is 48 mm on the other.
| |
MSA07.106-4648
$21.20
|
49 x 50 MM Delrin Die for Closing Snap-on Case Backs| |
49 x 50 mm Horotec screw-on Delrin Die for closing snap-on case backs.
Reversible die is 49 mm diameter on one side and is 50 mm on the other.
| |
MSA07.106-4950
$21.20
|
Set of 6 Delrin Quick Change Snap on Dies for Closing Snap-on Case Backs| |
A set of 6 Reversible Snap On Delrin Dies for closing snap-on case backs. Die diameters: 20 x 23 mm, 26 x 29 mm, 32 x 35 mm, 29 mm, 35 mm, and a 40 mm. Some people prefer to us snap on dies instead of thread on dies for quick change feature of the snap-on dies.
| |
MSA07.111
$62.02
|
Horotec Set of 5 Monster Size Thread on Delrin Dies| |
These 5 Horotec Thread on Delrin Dies are for monster size watches popular in recent years. The Set includes 5 Reversible Delrin Dies for closing snap-on case backs (46 x 48 mm, 49 x 50 mm, 52 x 55 mm, 57 x 60 mm, and 62 x 65 mm); inner side wall depth is 3mm. A great addition to anyone's set of dies if they own either the Bergeon or the Horotec thread on die presses.
| |
MSA07.108
$104.95
|
Horotec Set of 5 Jumbo Size Delrin Thread-On Dies for Fitting Crystals with Tension Ring| |
5 Reversible Thread-On Delrin Dies for fitting crystals with tension ring. Die diameters: 42 x 45 mm, 47 x 50 mm, 52 x 55 mm, 57 x 60 mm, and 62 x 65 mm. Tapered wall reversible dies with inner side wall depth of 1.5mm. All Horotec thread-on dies will work with the Bergeon 5500 Press.
| |
MSA06.523
$96.81
|
Horotec Set of 4 Jumbo Size Delrin Thread-On Dies for Fitting Flat Mineral Crystals| |
This set contains 4 jumbo size reversible delrin thread-on dies for fitting flat mineral crystals. Die diameters: 47 x 50 mm, 52 x 55 mm, 57 x 60 mm, and 62 x 65 mm. All Horotec thread-on dies will work with the Bergeon 5500 Press.
| |
MSA06.524
$99.95
|
Horotec Set of 5 Jumbo Size Delrin Thread-On Dies for Fitting Watch Bezels| |
Five Horotec Jumbo Size Reversible Thread-On Delrin Dies for fitting watch bezels. Die diameters: 40 x 45 mm, 46 x 50 mm, 52 x 55 mm, 57 x 60 mm, and 62 x 65 mm. All Horotec thread-on dies will work with the Bergeon 5500 Press.
| |
MSA06.525
$129.00
|
Set of 12 Delrin Thread-On Dies for Fitting Very Domed Crystals| |
12 Reversible Thread-On Delrin Dies for fitting very domed watch crystals. Die diameters: 18 mm, 20 mm, 24 mm, 28 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, and 65 mm. Reversible dies are domed in one side and flat on the other. Works on small, normal and jumbo sized crystals. All Horotec thread-on dies will work with the Bergeon 5500 Press.
| |
MSA06.526
$273.00
|
Set of 6 Rectangular Nylon Screw on Dies
| |
Set comes with 6 rectangular dies sizes, exterior length x interior length x width: 23.8 x 13 x 13, 28.8 x 18 x 16, 33.8 x 23 x 19, 38.8 x 28 x 22, 43.8 x 33 x 25 and 48.8 x 38 x 28 mm. Interchangeable with Bergeon Crystal Press 5500A, 5500C and Horotec Screw-on Crystal Presses.
| |
MSA06.530
$79.95
|
