Horotec Magtest is an electronic device for detecting magnetism, demagnetization and control of magnetic remanence of watches, movements, watchmaking tools, and parts. It combines the measurement function with the demagnetization function in a single device.
Items are placed on the Detect Zone to detect magnetism and results are displayed on the LCD touch screen. Items are then moved to the Demag Zone to commence demagnetizing.
There are 5 sensors and one of them is located in the center of the detection zone. The others are located on the corners of a 1.5 cm square. They can measure the force of magnetism and the position. A dot on the LCD screen shows a sensor with its position and the dot size is proportional to the magnetic force. If the LCD screen displays the presence of magnetism without any magnetic objects on the surface of detection, it is recommended to make a manual zero setting by pushing the off button. Power adapter can take voltages ranging from 100 to 240 volts.
Features a brand new LCD touchscreen for easy selections.
Voltage: 110v/220v. Dimensions: 155mm x 172mm x 55mm. Do Not use for testing mechanical watches.
MSA 19.115 $449.00
Horotec Micro Ball Bearing 8 Piece Watchmaker Screwdriver Set on Rotating Stand
These 8 screwdrivers have a newly redesigned stainless steel body with anodized aluminum Swivel Head that sits a top of and canal of Micro Ball Bearings allowing for a very smooth swivel rotation. Comes with 8 spare blades, which can be stored under the center cap of the rotating stand. Sizes of screwdrivers are 0.60 mm, 0.80 mm, 1.00 mm, 1.20 mm, 1.40 mm, 1.60 mm, 2.00 mm, and 2.50 mm. Non-skid base.
MSA 01.218-C $199.95
Horotec 17.104 Complete Aluminum Oil Cup Set
Shot blasted aluminium base, grey anodized. Equipped with 4 oilers with aluminium handle in 6 mm diameter and 4 synthetic ruby cups (6 mm, 8 mm, 9 mm, and 10 mm wells). Only a little bit of oil should be placed in each of the agate cups at a time. Oil should be transferred to the cups by large drops from a large oiler or a clean nail. In the center of the stand is pith wood cup for cleaning the oilers.
MSA 17.104 $209.00
New Bergeon 5395-55 Soft Gel Case Cushion, White
Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 55 mm. White in color.
BERG-5395-55-B $39.50
New Bergeon 5395-75 Soft Gel Case Cushion, White
Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 75 mm. White in color.
BERG-5395-75-B $43.32
New Bergeon 5395-55 Soft Gel Case Cushion, Black
Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 55 mm. Black in color.
BERG-5395-55-N $39.50
New Bergeon 5395-75 Soft Gel Case Cushion, Black
Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 75 mm. Black in color.
BERG-5395-75-N $43.32
Bergeon Movement Holder for ETA 6497 Movement
Anodized aluminum movement holder specifically made for ETA 6497 and 6498 movement. Support screw in hardened/tempered steel with polished end and locking system. Base diameter 31 mm. Compatible with the 6012 and 8935 hand setting tools.
Special order item. Please allow 4-6 weeks for delivery.
BERG-7100-ETA-6497 $86.00
Bergeon Movement Holder for ETA 775X Series Movement
Anodized aluminum movement holder specifically made for ETA 775X series movements (ie 7750, 7751, etc.) and Sellita SW500. Support screw in hardened/tempered steel with polished end and locking system. Base diameter 31 mm. Compatible with the 6012 and 8935 hand setting tools.
Special order item. Please allow 4-6 weeks for delivery.
BERG-7100-ETA-775X $186.48
Bergeon 31081-EETC ETA Chron Stud Removing Tool
Screwdriver with blade to remove ETACHRON Pitons. Has small fork shaped tip for removing the stud block. Overall length: 3.75 inches.
BERG-16918-EETC $39.95
Bergeon 31081-TETC ETA Chron Regulator Adjusting Tool
Screwdriver with blade to turn out ETACHRON Pitons. Fine adjustment of the spiral centering between the racket pins. Has small opening at the tip for adjusting the regulator pins. Overall length: 3.75 inches.
BERG-16918-TETC $34.95
Horotec Anti-Slip Ridge Bench Mat Small
Black silicone anti-slip tray with 19 grooves. Great for organizing and holding tools in place on your work bench. Measures 153 mm x 100 mm.
MSA 24.222 $24.95
Horotec Anti-Slip Ridge Bench Mat Large
Black silicone anti-slip tray with 32 grooves. Great for organizing and holding tools in place on your work bench. Measures 257 mm x 150 mm.
MSA 24.223 $34.95
Bergeon 7026-PMC-2A Angled Tweezers for Watch Hands
Stainless, antiacid, antimagnetic tweezers feature rounded tips at a 90° angle, which is great for holding the hands for installation. Swiss Made. 120 mm
BERG-7026-PMC-2A $46.69
Horotec Large Watchmaker Screwdriver with 1.50 mm Curvature Blade
Horotec Swiss made large watchmaker screwdriver features a knurled 10mm diameter stainless steel handle with a 19 mm red anodized aluminum red head mounted on ball bearings. The blade used in this screwdriver has a 3 mm body and reduces down to 1.50 mm at the tip, so the blade can be interchanged with any one of the MSA 01.019 series blades.
MSA 01.018-150 $49.95
Horotec Large Watchmaker Screwdriver with 2.00 mm Curvature Blade
Horotec Swiss made large watchmaker screwdriver features a knurled 10mm diameter stainless steel handle with a 19 mm red anodized aluminum red head mounted on ball bearings. The blade used in this screwdriver has a 3 mm body and reduces down to 2.00 mm at the tip, so the blade can be interchanged with any one of the MSA 01.019 series blades.
MSA 01.018-200 $49.95
Horotec Large Watchmaker Screwdriver with 2.50 mm Curvature Blade
Horotec Swiss made large watchmaker screwdriver features a knurled 10mm diameter stainless steel handle with a 19 mm red anodized aluminum red head mounted on ball bearings. The blade used in this screwdriver has a 3 mm body and reduces down to 2.50 mm at the tip, so the blade can be interchanged with any one of the MSA 01.019 series blades.
MSA 01.018-250 $49.95
Horotec Large Watchmaker Screwdriver with 3.00 mm Curvature Blade
Horotec Swiss made large watchmaker screwdriver features a knurled 10mm diameter stainless steel handle with a 19 mm red anodized aluminum red head mounted on ball bearings. The blade used in this screwdriver is 3 mm in diameter, so the blade can be interchanged with any one of the MSA 01.019 series blades.
MSA 01.018-300 $49.95
Bergeon 7965 Series Screwdriver & Dynamometric Cylinder Set in Aluminum Case
Premium suitcase in aluminium set comes with 10 screwdrivers with special profile (Sizes: 0.50 mm, 0.60 mm, 0.80 mm, 1.00 mm, 1.20 mm, 1.40 mm, 1.60 mm, 2.00 mm, 2.50 mm and 3.00 mm), tube with 2 stainless steel replacement blades for each screwdriver size, tube with 1 HSS curvature blade for each screwdriver size and 10 dynamometric cylinders (10 nmn, 15 nmn, 20 nmn, 25 nmn, 30 nmn, 35 nmn, 40 nmn, 45 nmn, 50 nmn and 55 nmn).
Handle made of stainless steel with special profile compatible with the 7965-C series cylinder.
Tube with 2 conical blades made of hardened stainless steel 54HRC reference 6899-T. Tube with 1 parallel blade reference 6895-M, per diameter.
Head made of synthetic material POM self-lubricant.
Can be used also without dynamometric cylinder.
Ø from 0.50 mm to 3.00 mm
10 exchangeable dynamometric cylinders
Stainless steel.
Compatible with all specific. screwdrivers reference 7965-…
Preset, fixed torque: from 10 to 55 mNm.
Bidirectional.
Can be positioned on the whole length of the screwdriver
Possibility to mount 2 cylinders, one for screw control, the other for unscrew control.
Special order item. Please allow 4-6 weeks for delivery.
BERG-7965-PREMIUM $3,100.00
Bergeon's 7812 Quick Battery and Bracelet Service Kit in Hard Case
This set is a Jewelers dream for watch battery replacing and for bracelet changing and sizing. Comes with 18 specialized tools and accessories in a hard plastic travel case. Everything you need to open cases, install batteries along with all you need to size, install and remove bracelets: Steel spring bar tool (6767-S), jaxa mini case wrench with square pins (2819-MINI), watchmakers pocket/case knife (7403), 4x eye loupe (2611-2.5), non-magnetic tweezer #00 (7026-00) 2 stainless screwdrivers and replacement blades 1.00mm and 1.60mm (30081-100, 30081-160, 6899-M-100, 6899-M-160), plastic battery tweezer with steel lip (6460-P), screw type bacelet pin remover (7230), flat nose plier (2510-N), microfiber cleaning cloth (7039), flexible bracelet gauge (6789) 1 spare fork tip for spring bar tool 6767-S (6767-A) , 1 spare pin tip for spring bar tool 6767-S (6767-B), 1 plastic tube (30080-TN). Click here to order the tools individually.
BERG-7812 $316.00
Bergeon's 7815 Master Service Set in Hard Case
This master service set is truly a must have set for watch battery service, watch bracelet changes, length setting, opening and closing of screwed waterproof watch back covers. Comes with 46 specialized tools and accessories in a hard plastic travel case:
Full size Jaxa case wrench (Bergeon 2819-08), 4 sets of 3 bits for the Jaxa case wrench (Bergeon 2819-A, 2819-B, 2819-C, 2819-D), multifunction bracelet press (Bergeon 8745), bracelet holder block (Bergeon 6744-P), 4x loupe (Bergeon 2611-TN-2.5), plastic tweezers with steel lip (Bergeon 6460-P), anti-magnetic, stainless steel tweezers (Bergeon 7026-1), 5 stainless steel screwdrivers 1.00 mm, 1.20 mm, 1.40 mm, 1.60 mm and 2.00 mm (Bergeon 30081-100, 30081-120, 30081-140, 30081-160, 30081-200), 5 tubes with 2 spare screwdriver blades (Bergeon 6899-T Ø1.00 mm, 1.20 mm, 1.40 mm, 1.60 mm and 2.00 mm), snap back case knife (Bergeon 4932), flat nose pliers (Bergeon 2510-N), microfiber cloth (Bergeon 7039), flexible measuring band for wrists (Bergeon 6789-N), spring bar tool (Bergeon 3135), spare pin & fork ends for 3135 spring bar tool (Bergeon 3153-R), leather buff stick with buff protector (Bergeon 1282A & 4056-6), steel ruler (Bergeon 2819-08-R), 6 plastic boxes Ø15 x 30mm (Bergeon 2963-B), and dust blower (Bergeon 30540)
Click here to order the tools individually.
Special Order Item. Please allow 4-6 weeks for delivery.
BERG-7815 $949.00
Bergeon 7825 Extra Fine Forked Tweezers to Fit Spring Bars
Spring bar fitting tweezers with extra fine tips measuring at 1.00 mm diameter. This tool is great for bracelets with small spring bar openings. Allows to take off the bracelet from the watchcase without removing the clasp.
BERG-7825 $172.95
Replacement Tips Bergeon 7825 Extra Fine Forked Spring Bar Tweezers, Sold Per Pair
Pair of replacement extra fine tips measuring at 1.00 mm diameter for the Bergeon 7825 Tweezers for removing and installing spring bars..
BERG-7825-BR $142.00
Watch Winder for 2 Watches MSA 19.349
Watch winder for 2 watches. Noiseless, reliable and has a modern design with large transparent lid. Winds clockwise, auto (bi-directional) and counter-clockwise. AC adapter included.
Features 4 different modes:
Mode A: 650 Turns Per Day, 13 cycles, each cycle turns 50 times then rests. Each cycle takes 110 minutes.
Mode B: 900 Turns Per Day, 18 cycles, each cycle turns 50 times then rests. Each cycle takes 80 minutes.
Mode C: 1200 Turns Per Day, 24 cycles, each cycle turns 50 times then rests. Each cycle takes 60 minutes.
Mode D: 1500 Turns Per Day, 30 cycles, each cycle turns 50 times then rests. Each cycle lasts 48 minutes.
Dimensions: 135(W) x 289(H) x 225(D) mm.
MSA 19.349 $129.95
Bergeon 7871 Magic Wiper, Single Sheet
For recovering small metal pieces. This paper component-collector is tearproof and washable. Easy use and cleaning. Consisting of 2 double-sided magnet straps. Supplied flat. Folded dimension: 285 x 82 mm. Comes in package of 1.
BERG-7871-1 $18.00
Horotec Case Cushion with Built in Slot for Parts, Jumbo Size (Now with Cover)
This new case cushion has a 90.00 mm diameter to hold larger cases. It stands 15.00 mm tall and has a built in slot for small parts while taking apart your piece. Treat yourself with this latest creation from Horotec, great for all watchmakers and hobbyist alike.
NOW COMES WITH PROTECTIVE SEE-THRU COVER WITH KNOB!
MSA 09.305 $39.95
Euro Tool Multi-Size Looping Pliers
Why have three separate bail making pliers when you can have one that does the job of three? This Multi-Size Looping Pliers can make a variety of loops ranging from 2 mm to 9 mm for a variety of combinations. Made of stainless steel with double leaf springs, these pliers are another first - invented by EURO TOOL. Total length 6" (150 mm).
PLR-736.00 $16.95
Miniature Economy Case Press With 6 Nylon Dies
This is the miniature version of the Economy Case Press CRY905.00. Comes with 6 dies: 14 mm, 20 mm, 24 mm, 32 mm, 36 mm, and 37 mm. Weighing in at about 1 lb and standing about 3 1/2" high. Don't let the size fool you. This tool might not have the same amount of power as big brother to handle large size case, but handles itself pretty well against smaller size cases. Takes the same dies as the CRY905.00 press, so if you need larger sizes we have sets of dies available.
CRY904.00 $18.95, On Sale $15.95
Economy Spring Bar Tool
Economy spring bar tool with forked end and pin end. Forked end measures 1.80 mm and pin end measures 0.80 mm.
SBT200.00 $8.95
Pin-End Replacement tips for SBT200.00
SBT200.05 $1.40
Forked End Replacement tips for SBT200.00
SBT200.10 $1.30
Horotec Detachable Bench Vice
Similar to the Bergeon Bench Vice. The plate is screwed onto the bench and the vice can slide on and off. Jaws open up to 22 mm. Width of jaw is 46 mm.
FB-751 $249.95
Steel Die Type 07.335-038 for Breitling Watch Case
15 Sides with interior measuring 37.40 mm from corner to corner, and from interior wall to wall 36.70. The exterior diameter of the die is 40.00 mm. This die fits inside the Horotec handle or can be used with the Horotec MSA-07363 and FB-236 openers along with the Bergeon 5700 Z & RO openers.
MSA 07.335-038 $88.50
Horotec 07.344 Adjustable Bit Holder for Large Cases up to 65 mm
Jumbo watch cases are getting more popular everyday and chances are you will need one of these large bit holders to open that monster case back. Adjustable bit holder opens up to a maximum diameter of 65 mm. Compatible with all Horotec Case Openers!
MSA 07.344 $154.95
Japanese Style Spring Bar Tool
This popular model is called "Japanese" style because it originated in Japan and features a special shaped fork tip. Many people prefer this shape for getting under straps and bands. Anodized aluminum body with hardened tool steel double-ended tip. Forked end measures 1.60 mm and pin end measures 0.70 mm.
SBT205.00 $9.95
Reversible Replacement Tip for SBT205.00
Reversible replacement tip for SBT205.00. Forked end measures approximately 1.6 mm and pin end measures 0.70 mm.
Rhein Fils Switzerland Classic Collection can be found sold around the world in finer stores.
Rhein Fils "British Lambskin" Hand Made, Rhein Fils "Ecopell" Ultra Soft Leather Strap Hand Made Straps, Rhein Fils "Nanotech" Dirt Resistant Leather Hand Made Straps, Rhein Fils Water Resistant Leather Hand Made Straps with Titanium Buckle
www.ofrei.com
Otto Frei, Watch Parts Since 1930
Customers Entrance
126 2nd St.
Oakland, California 94607
Mailing Address: PO BOX 796, Oakland Ca. 94604
Freight Shipment Address: 119 3rd St. Oakland Ca. 94607
USA
For stock checks on watch parts not listed on the site please call the watch material department at 510-832-0355 ext 3., Monday to Friday 9 AM to 5 PM Pacific Standard Time Zone. Stock Checks For Watch Movement & Watch Case Parts