Watch Bracelet Tools

No longer do you need to use a hammer to drive out the pins on watch bracelets. This is a gem of a tool; in fact I would say this is the best new bracelet tool of the 90's. Don't waste you time with the much bigger and cheaper model, which is now coming out of China. If you have not picked up this tool yet, do so now and you will be very happy. It works so well just remember to keep you eyes on the job, or you will need to replace the pin. Comes with two long length pins 12 mm long with diameter of 0.78 mm. Also includes two spacers in different height size for a more precise link pin removal; giving that watch bands comes in different thickness.

FB-506
$15.95
 

Pin 12 mm long with diameter of 0.78 mm. Use with either the FB-506 link pin remover or the MSA 10.532 link pin remover.

FB-507
$3.50
 

Pin 4 mm long with diameter of 0.78 mm. Use with either the FB-506 link pin remover or the MSA 10.532 link pin remover.

HOL-118.01
$3.50
 

This Bergeon tool is the most complete product on the market for punching pin or unscrewing screw on watch bracelets. Supplied with one slotted base number 6744-P, one pin holder with drum number 6745-PG-A, two bases with adjustable height number 6745-SR-20 and 6745-SR-28, one set of 10 blades number 6745-M (sizes: 2x .80, 2x 1.00, 2x 1.20, 1x 1.50, 1x 2.00 mm) and 2 Phillips number 6745-MC (size: 1.50 and 2.00 mm) on wooden stand number 6745-MS, and one set of 6 pins number 6745-G (sizes: .40, .60, .80, 1.00, 1.50 & 2.0 mm) on wooden stand number 6745-GS. The slotted base number 6744-P allows to maintain in a good position watches with leather or metal bracelet. Both bases number 6745-SR20 and 6745-SR28 allow the height adjustment.

FB-520
$224.50

 

Set of six Bergeon punches number 6745-G (sizes: .40, .60, .80, 1.00, 1.50 & 2.0 mm) on a wood block. These punches also work with the Minathor Knife, by Wenger.

FB-521
Regular Price $15.95
On Sale Only $14.60
 

Includes 10 Screwdriver Blades. 8 standard heads number 6745-M (sizes: .80, 1.0, 1.2, 1.5 and 2.0 mm), also 2 phillips number 6745-MC (sizes: 1.5 and 2.0 mm) on a wood block. These blades also work with the Minathor Knife, by Wenger.

FB-531
26.80
 

This is a very well made tool that will allow you to both drive out links in bands, and unscrew band screws. Supplied with one slotted base, one pin holder number MSA-10.500-A, one pin holder with knurled handle, eleven pin punches sizes .40, .60, .70, .80, .90, 1.00, 1.10, 1.20, 1.40, 1.50, and 2.00 mm; two sets of 6 spare blades sizes .80, 1.00, 1.20, 1.40, 1.60, and 2.50 mm; 1 screwdriver platform base with nylon protector.

FB-237
$156.00
 

This is a replacement pin holder for those who lost or worn out their piece from the Horotech Link Remover. Not compatible with the Bergeon 6745-100 and 6744 tool, but can be use as an extra pin holder to drive out pins since the pin punches fits this item also.

MSA-10.500-A
$14.95
 

Bergeon, Swiss-made bracelet-pin remover comes with a set of 2 slotted bases (6744-P) in synthetic material to maintain good position while driving pins in or out. Supplied with 6 pins number 6745-G (sizes 0.40 mm, 0.60 mm, 0.80 mm, 1.00 mm, 1.50 mm, and 2.0 mm), one pin holder (6744-PG), and a wooden base.

FB-512
$69.00
 

Yellow soft synthetic material is new from Bergeon and is especially made for use with precious metals bracelets, when you do not want to risk getting scratches on the bracelet from the standard rigid hard synthetic nylon-like material that the normal Bergeon 6744-P and 6744-P1 bases are made of. Dimensions: 53x53x26 mm. Slot sizes: 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, and 7.0 mm. Can be used with Bergeon 6745-100, 6745 and 6744.

BERG-6744-P1-S
$11.65
 

New Bergeon yellow soft synthetic material pin removing base Bergeon part number 6744-P-S. Especially made for use on precious metal bracelets, without any risk of scratches. Slot sizes: 2.2 mm, 2.6 mm, 3.0 mm, 3.4 mm, 3.8 mm, and 4.0 mm. Can be used with Bergeon 6745-100, 6745 and 6744.

BERG-6744-P-S
$7.60
 

In Stainless Steel. The Minathor tool holder 1550-0 is the exact same thing as the Bergeon pin holder 6744-PG. Same tool with different part numbers. Can be use as an extra pin holder to drive out pins.

1550-0
$13.80
 

Bergeon 1616 pin extractor set in a wood box. Set of 6 interchangable tips number 6745-G (sizes: 0.40, 0.60, 0.80, 1.0, 1.5, and 2.0 mm) in a wooden box. The Bergeon replacement pin punches 6745-G and the Minathor tool holder 1550-0 can be used as refills for this tool.

FB-503
$44.00
 

This new set from Horotech is great deal. Only one sloted base is really needed and is all that the majority use when doing this task. The Horotech set comes with one sloted base, a wood stand, 10 different size pin punches (0.40, 0.60, 0.70, 0.80, 0.90, 1.0, 1.1, 1.4, 1.5, 2.0 mm) and one pin tool holder. The Bergeon replacement pin punches 6745-G can be used as refills for this tool.

FB-MSA10510
$39.60
 

Our most popular selling set of pin punches to retail jewelers. Three sizes, 0.70 mm, 0.80 mm and 1.0 mm. Pin punches are held in place by set screws and refill punch tips are available

189.820
$14.95
 

Like the Horotec only made in India. It contains one slotted base, one pin holder, one 2.50 mm screwdriver, 2 sets of pins sizes .40, .60, .80, 1.00, 1.50, and 2.00 mm. Not exactly the highest quality, however you can use Bergeon replacement bits 6745-G & 6745-M when it's time to replace the pins pushers or screwdriver blades.

180-INDIA
$34.50
 

Now comes with 2 bracelet holders and 0.60 mm, 0.80 mm, 1.00 mm pins. New entry level product for driving our bracelet pins. When the India made punches break you can replace the India with Bergeon or Horotech punches.

FB-549
$19.95
 

This is a Chinese made High quality copy of Swiss made tools. The Swiss made tools are deemed the best tools to use, but these Chinese made tools are getting pretty close to that plateau. Tool Kit Comes with: 1 screwdriver (1.20 mm), 1 pin bit holder, 1 spring bar tool, 1 nylon/steel watchmaker's hammer, 3 long tip bits (0.70, 0.80, and 0.90 mm), 3 short tip bits (0.70, 0.80, and 0.90 mm), and 1 adjustable bracelet holder.

FB-552
$33.50
 

Great Bregeon tool for unscrewing screws in watch bracelets. Adjustable turning table that can be set at different heights. Only from FREI & BOREL is this tool suppled with a 1.00, 1.40 and 1.80 millimeter screwdriver blades.

FB-510
$41.20
 

Hand Vise for Screwing and Unscrewing Bracelets, on a wood block with one screwdriver and four screwdriver blades for the hand vice in 1.0, 1.4, 1.8 and 3.0 mm.

FB-514
$76.30
 

This is the best in the market to date. Better than the others we offer. One size is brass faced, the other is a nylon material. Both sides are replaceable and a fiber face is also available.

FB-705
$14.90
 

Twice as heavy as FB-705. Decent mallet, but not the best.

FB-706
$18.95
 

As far as ratings go, this mallet stamds last compare to the others we offer. Fairly inexpensive, but you get what you pay for.

FB-393
$9.95
 

To remove screws quickly and safely, blades size is 2.9 mm and two replacements on are in the base.

HOL-119.00
$29.90
 

Screw blade size is 1.0 mm, replacements blades are available.

HOL-120.00
$16.95
 

Hardened steel. Flat tips from .51mm-1.3mm, can be ground to make other sizes. 41mm long, 2.35mm shank. Drive out watchband pins, broken screws & rivet. Use adjustable 83mm brass holder to prevent damage from hammering.

47.890
$38.95
 

Swiss Made. Rectangular base with 3 screwdriver blades (1.0 mm, 1.40 mm, and 3.00 mm) to remove bracelet screws.

189.895
$18.70
 

Round heavy base with 3 screwdriver blades (1.0 mm, 1.4 mm, and 3.00 mm) to remove bracelet screws.

MSA-10.520
$16.98
 

In brass. Base dia: 70 mm. With 4 screwdriver blades dia: 1.00, 1.40, 1.80, and 3.00 mm. Working blade with adjustable height. Removable rubber protection on top. Very stable.

BERG-6730
$92.00
 

Now its easy to remove links on many watch bracelets by both pushing down and pushing out the link clip with this special tip plier.

159.023
$9.95
 

The latest Bergeon Watch Bracelet Tool for removing link-pins. This is an efficient tool used for inserting, removing, and reinserting pins for all types of metal bands. Its plastic support prevents damage to the band. Using the set of shims provided as standard accessories, you can adjust the plier to the size of the band. Supplied with a plastic case together with the instructions.

BERG-6819
$178.00
 

The Beregon 6819 Plier to remover pins has been copied many times in different countries around the world. The MSA-.006 is by far the best of all the copies of the Bergeon 6819. It is is supplied with 5 different diameter pin pushers 0.60, 0.80, 1.00, 1.2 and 1.5 mm. Replacements are available.

MSA-10.006
$49.50

It is is supplied with 3 different diameter pin pushers 0.70, 0.80, 1.00. This tool can use the same pins for MSA-10.006 in only 3 sizes: 0.60, 0.80, and 1.00 mm.

PL46.001
$29.95
 

This tool comes in a green handle. It has a locking system. Cutting width: 17 mm. Total length: 205 mm. Opening: 4 mm.

AF-125.622
$25.30
 

This Bergeon Tool was designed to help with the installation of new modern bracelets like those made by Omega and a few others. Does not work on Rolex® Bracelets, for those use the First-Quality Spring Bar Tool. Otto Frei, www.ofrei.com is not affilated or sponsored by Rolex® Watch U.S.A Place spring bar in the bracelet, compress the spring bar with the tool, lock it, then put the bracelet in place and release and lift the pliers. The width adjusts from 10 to 30 mm and locks by turning a screw. The tool has notches for positioning of the forks from 0 to 45 degree angle for easy of use. Stainless steel forks that come with these pliers are reversible, 1.3 mm fork opening thickness at tip end .33 mm and tube body diameter 1.65 mm. (Does not come with optional BERG-6825FF tips) Bergeon 6825

BERG-6825
$128.00
 

Same as Bergeon 6825 Pliers to Fit Spring Bars, but comes with Bergeon 6825-FF Fine Fork Points instead of the standard fork end.

BERG-6825-PF
$128.00
 

Stainless steel forks are reversible, 1.3 mm fork opening thickness at tip end .33 mm and tube body diameter 1.65 mm.

BERG-6825F
On Sale 9.31 each
 

Spare Fork Fine Points for the BERG-6825 Stainless steel forks are reversible, 1.1 mm fork opening thickness at tip end .23 mm and tube body diameter 1.40 mm.

BERG-6825FF
$9.31
 

This Seiko bracelet sizing tool is designed to make your Seiko band sizing jobs a whole lot easier to perform. Equipped with band holders, blade holder, ruler, screwdriver holder, screwdriver, blades and pushing removing bit, pressor, removing bits/support bits, and band sizing holder. 3 removing bits sizes .45, .60, and .80 mm. 3 pipe install or support bits sizes .45, .60, and .80 mm. 3 screwdriver blades sizes (2x) 2.5 and (1x) 1.2 mm. 1 pushing removing bit. Replacement bits are available from stock and will be added to the site soon.

S-926
$76.50
 

This versatile tool can be used for various functions. It can be used to drive out pins from metal watch bracelets. Included are three 0.8 mm and three 1.0 mm pin punches. It also functions as a tool for removing and fitting watch bracelet screws. Included are five 1.0 mm blades, three 1.2 mm blades, and three 1.6 mm blades. It can even be used to fit and set watch hands and can be used with a movement holder (sold separately). Includes a 0.5 mm black hard nylon tip, a 0.80 blue hard nylon tip, a 1.0 mm white hard nylon tip, and a concave red hard nylon tip. This multi-function press includes storage for the included blades, tips, and pin punches. Click here for Replacement Blades, Tips, and Pin Punches for AF Multi-Function Press AF185.150.

AF185.150
$239.00
 

What size strap do you need? With this handy gauge you would be able to answer that question in seconds. Made of 22 gauge sheet stainless steel this gauge will last a lifetime. Size the watch case lug or the watch band with this tool. Measuring straps.

SUPERBAND-GAUGE
$13.95
 

Black in color. Goes up to 10 1/4" & 235MM.

BERG-6789
$4.00