HOROTEC Watch Bracelet Tools

This is a very well made tool that will allow you to both drive out pins in bracelet links, and unscrew band screws. Supplied with one slotted base, one pin holder number MSA-10.500-A, one pin holder with knurled handle, eleven pin punches sizes .40, .60, .70, .80, .90, 1.00, 1.10, 1.20, 1.40, 1.50, and 2.00 mm; two sets of 6 spare blades sizes .80, 1.00, 1.20, 1.40, 1.60, and 2.50 mm; 1 screwdriver platform base with nylon protector.

FB-237
$249.00
 

Universal black plastic bracelet holder with 9 holes and 8 slots of 2.8 to 6.3 mm. Overall Size: 52mm x 52mm x 25mm. Replacement/accessory item for MSA 10.499, MSA 10.500, MSA 10.510, and MSA 10.511.

MSA 10.501
$7.95
 

This new set from Horotech is great deal. Only one sloted base is really needed and is all that the majority use when doing this task. The Horotech set comes with one sloted base, a wood stand, 10 different size pin punches (0.40, 0.60, 0.70, 0.80, 0.90, 1.0, 1.1, 1.4, 1.5, 2.0 mm) and one pin tool holder. The Bergeon replacement pin punches 6745-G can be used as refills for this tool.

FB-MSA10510
$44.95
 

This is a replacement pin holder for those who lost or worn out their piece from the Horotech Link Remover. Not compatible with the Bergeon 6745-100 and 6744 tool, but can be use as an extra pin holder to drive out pins since the pin punches fits this item also.

MSA-10.500-A
$27.50
 

Pin punch tool with anodized brass handle and stainless steel anvil. The handle measures approximately 54 mm in length and 6 mm in diameter. The box set comes with 11 pin punch sizes 0.40 mm, 0.60 mm, 0.70 mm, 0.80 mm, 0.90 mm, 1.00 mm, 1.10 mm, 1.20 mm, 1.40 mm, 1.50 mm, and 2.00 mm. Stored in pre-cut foam inserts.

MSA 10.533
$32.95
 

Bracelet holder vice. Maximum bracelet thickness 9.90 mm. Vice measures 55 x 35 x 22 mm. Can be used with presses MSA 10.500 (FB-237) and 10.499.

MSA 10.513
$29.95
 

Horotec tool for opening snap back cases as well as removing bezels. Can also be used to remove pins from bracelet links. Equipped with 2 pairs of hardened steel blades (2mm and 4mm), 1 delrin support die, 1 pin holder, assortment of 11 pins (sizes: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.10, 1.20, 1.40, 1.50, 2.00mm) and a precision sliding carriage for extracting glasses and case backs. Has a maximum opening of 60mm. Size: 155mm x 100mm x 110mm.

MSA 07.119
$499.95
 

Horotec tool for opening snap back cases as well as removing bezels. Can also be used to remove pins from bracelet links. Equipped with 2 pairs of hardened steel blades (2mm and 4mm), 1 delrin support die, 1 pin holder, assortment of 11 pins (sizes: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.10, 1.20, 1.40, 1.50, 2.00mm) and a precision sliding carriage for extracting glasses and case backs. Has a maximum opening of 45mm. Size: 120mm x 75mm x 85mm. To remove case back, place watch with crystal face down on the adjustable center support that moves up or down, lock center support with set screw on back. Once the case back is in position and jaws are lined up in position turn the handle and the case back will now come off. To remove pins in bracelets, put the delrin support place and select diameter pin pusher need and place in the pin holder. Place the pin holder in place on the opposite side of the delrin support. Position bracelet in center support, set support lock. Be sure arrows on bracelet is pointing in right direction for removing pin. Once everything is in position turn handle and the pin will side out.

MSA 07.115
$389.95
 

New Horotec tweezer for removing spring bars. INOX, sandblast with mirror polish tip. Designed to insert/remove double shoulder and double flange spring bars with one easy sqeeze of the tweezer. Not for use on single shoulder spring bars. Length: 120 mm. Tips are about 1.60 mm wide.

MSA-10.306
$42.95