Seitz Assortment of 120 Friction Bushing for Flat Calibers
In plated brass, 40 sizes with exterior diameters of 0.70 to 3.00 mm.
Seitz Assortment of 120 Friction Bushing for High Calibers
In plated brass, 40 sizes with exterior diameters of 0.70 to 3.00 mm. The exterior diameters and the hole diameters of this assortment are the same as assortment 30320-1, however the height of the jewel is about double.
Anvil Incablocs Set
Features 6 Pushers and 7 Rivetting Stake; axle diameter at 4 mm. Tool used for fixing Incabloc shock-absorbers.
MSA 13.153 $129.95
Seitz Attachment to Tighten Cannon Pinions
To tighten cannon pinion, fit the special pusher to the spindle and the special stake to the platform of the jeweling tool. The blades must be exactly opposite each other, and the micrometer screw must be set before the work is started.
Bergeon 31300 Seitz Jeweling Kit
Complete set delivered with operating instructions. Contents includes 1 jewelling tool, 12 flat pushers, 4 stakes, 12 pump pushers, 11 concave pushers, 15 reamers with spindle, 4 tools for reducing hour hand holes, 4 tools for reducing holes in plates, 3 tools for setting levers, 1 platform stake, 1 micrometer needle with stake, 1 bush for nut, 1 pusher and stake for lanterning cannon pinions, 1 bakelite base in wooden case.
Special order item, please allow 4-6 weeks for delivery
Vintage Seitz 30150 Jeweling Kit, Missing A Few Items
This vintage Seitz 30150 Jeweling kit has been in our office since 1967 or before. Art Rabb, was our resident watch material expert and our in house expert on watch repair. Before joining us in 1967 and after his service in WWII, Art had extension experience in watch repair, lathe work and watch material picking. Art, wouldn't let us sell this tool and I know it was only used a few times, only once since 1984. So, this set is in almost new condition. What did happen was that some items were picked out of the kit and sold to customers and several items have been discontinued by Seitz over the many years. What reamers and punches which were sold from the kit have been replaced with new ones.
This 30150 Master Seitz Jeweling kit contains the following items which are not in the now discontinued 30300 and the new Seitz 31300 kits. The bushing tool holder set 30154, has only 2 collet chucks and Seitz has discontinued making these items. In this kit is the Seitz 30159 holder and 3 collect chucks, Seitz 30157/3 Face Plate and 3 Clamps, Seitz 30155 assortment of Self Centering Points that automatically center the jewels in respect to the plates, Seitz 30158 Hand Setting Set, 30528 Seitz Grinding Stone. Included in the set is a Jewel Gauge with 42 Jewels.
Contents includes the items found in the 30300 set and don't forget the almost brand new jeweling tool, 12 flat pushers, 4 stakes, 12 pump pushers, 11 concave pushers, 15 reamers with spindle, 4 tools for reducing hour hand holes, 4 tools for reducing holes in plates, 3 tools for setting levers, 1 platform stake, 1 micrometer needle with stake, 1 bush for nut, and wooden case.
Vintage Press Used Once In 40 Years, Almost New Condition
Bergeon Seitz Pivot Straightener 30350-D-02
A wonderful tool that sure looks good. Allows the pivots to be straightened without breaking due to a control device as well as a screw fitted with a stop. 41 Jewelled holes diam. 0.07 - 0.15 mm. Progression 0.025 mm. Bergeon reference #30350-D-02.
Otto Frei, Watch Parts Since 1930
126 2nd St.
Oakland, California 94607
Mailing Address: PO BOX 796, Oakland Ca. 94604
Freight Shipment Address: 119 3rd St. Oakland Ca. 94607