Bench Top Accessories

Every Watchmaker's work bench should have one of this lamp. It gives more than enough light to cover your benches surface. It uses three T5 14W fluorescent light bulbs, comes with electronic ballast and On/Off switch. The dimension of the piece are 91cm (35.8 inches) arm length, 61cm (24 inches) head length, and 11cm (4.3 inches) head width. The color is white and uses 110V/60Hz voltage.

FB-13.110
$79.95

 

Pair of ergonomic leatherette anti-slip armrests helps reduce fatigue when working for a prolonged period of time. Ideal for benches not equipped with armrests. Measurements: 280 x 180 x 25mm

BERG-7327
$122.00
 

Very fine quality, Bergeon vice, width of jaws 45 mm. Jaws open up to 35 mm. Only the fixing plate is permanently screwed to the bench. The vice can be set up or removed in a few seconds. Reliable clamping device. Smooth, parallel jaws.

FB-750
$389.10
 

Stainless Steel vice plate only, for the FB-750.

BERG-2021-A
$59.95
 

Similar to the Bergeon Bench Vice. The plate is screwed onto the bench and the vice can slide on and off. Jaws open up to 22 mm. Width of jaw is 46 mm.

FB-751
$249.95
 

Made in chromium-plated brass, with grooves to keep it parallel for another gripping device. Interchangable plates of hardened, rectified steel. Width of plates: 15.5 mm. Capacity: 0-15 mm. Depth: 9 mm. Size: 15x15x76 mm.

BERG-6876
$258.00
 

This handy Bergeon gauge should be on every watchmakers bench. Now you can measure the stem size, crown tap, crown diameter, crown opening, case tube diameter, and strap lug width with one single tool. Dimensions: 85 x 85 x 85 x 1 mm.

FB-115
$69.00
 

Bergeon bench mat, standard green does not reflex light. Structured, stiff and isopropyl alcohol resistant surface with a self-adhesive back. 320 x 240 x 1.5 mm (12 5/8" x 9 7/16" x 1/16")

BERG-5808-V
$54.00
 

Slightly soft and flexible, allowing to execute various works such as assembly, casing, and control in optimal conditions thanks to a better contrast with the different colors. The anti-skid lower surface avoids having to stick the mat on the workbench and allows to user to choose a color adapted to his work. 320 x 240 x 2 mm (12 19/32" x 9 15/32" x 1/16")

BERG-7808-V
$38.76
 

Plastic mat with adhesive back. Flat, stiff and solvent resistant surface. Measures 320 x 240 x 0.5 mm (12 5/8" x 9 1/2" x 1/32").

BERG-6808-V
$22.95
 

Horotec anti-skid bench mat, no self-adhesive but soft enough to be very adherent. Has a deeper shade of green and slightly thicker than the other bench mats. 350 x 250 x 2 mm (13 3/4" x 9 13/16" x 1/16")

MSA 24.203
$19.95
 

Inexpensive plastic mat with special sticky back without adhesive. Ideal for apprentices and employees, when you don't want them using your more expensive rubber mat. Measures 350 x 240 x 0.5 mm (13 3/4" x 9 1/2" x 1/32").

MSA 24.206
$12.60
 

Inexpensive plastic mat with special sticky back without adhesive. Ideal for apprentices and employees, when you don't want them using your more expensive rubber mat. Measures 350 x 240 x 0.5 mm (13 3/4" x 9 1/2" x 1/32").

MSA 24.207
$12.60
 

Black silicone anti-slip tray with 19 grooves. Great for organizing and holding tools in place on your work bench. Measures 153 mm x 100 mm.

MSA 24.222
$24.95
 

Black silicone anti-slip tray with 32 grooves. Great for organizing and holding tools in place on your work bench. Measures 257 mm x 150 mm.

MSA 24.223
$34.95
 

Sometimes the case back does not screw off or snap off and the only way to gain entrance to the watch movement is thru the crystal. The watch would then have what is know as a two-piece stem and crown and after you removed the crown you just insert this pump into the hole and pump away until the plastic crystal pops off the case. To Remove crystals quickly and safely. Available with 3 heads: diameter at 1.60, 2.00, and 2.50mm. 1 key for removing the half-stem with the crown.

BERG-5011
$181.00
 

The rounding part of the tool is jewelled and should be used with a lubricant. I've heard others say that this tool can be used with Diamantine or similar product to round the tips of balance pivots.

BERG-5482
$116.30
 

Remover dents from Pocket Watch and other cases with ease.

DR-905
$8.95
 

Replacement work-drivers for Bergeon 30090 driver opener. Assortment includes one of each size (small hole diameter x large hole diameter): 0.25 x 0.30, 0.32 x 0.35, 0.35 x 0.38, 0.40 x 0.45, 0.45 x 0.50, 0.55 x 0.60, 0.65 x 0.70, 0.70 x 0.75, 0.75 x 0.80, 0.85 x 0.90, 0.95 x 1.00, 1.05 x 1.10 mm.

BERG-30091-A
$114.00
 

Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 55 mm.

BERG-5395-55
$39.50

 

Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 75 mm.

BERG-5395-75
$43.32

 

Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 55 mm. Black in color.

BERG-5395-55-N
$39.50

 

Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 75 mm. Black in color.

BERG-5395-75-N
$43.32

 

Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 55 mm. White in color.

BERG-5395-55-B
$39.50

 

Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 75 mm. White in color.

BERG-5395-75-B
$43.32

 

This Case Cushion is wrapped around with a plastic ring. The diameter of this piece is 56.2mm.

MSA 09.303
$23.95
 

This inexpensive plastic dust cover and tray may look like a cheese tray, but for the watchmaker, it means clean parts. The segmented bottom separates groups of parts. You can also flip the base and use it as a display tray, the lid will fit nicely.

FB-117
$8.60
 

Extension cover made especially for the Bergeon 30097-BC parts tray to help a watchmaker save space. Using the extension cover, the parts tray can stack on top of one another and using the dust cover to cover the top parts tray. Item will also fit the FB-117. Dimensions: Outside diameter is 94 mm, insider diameter is 86 mm, height is 52 mm.

BERG-30097-RH
$21.45
 

Bergeon Swiss made extra large parts tray features 16 various size sections surrounding a 85 mm diameter center storage to neatly separate and organize your parts during repair. Comes with plastic cover to keep out dust during storage. Dimensions: 155 mm (6 1/8" ) diameter tray. Overall height of the parts tray and cover is 107 mm (4 1/4").

BERG-30097-XL-BC
$56.00
 

Single bar of Premium grade Rodico.

BERG-7033-1
$8.50
 

Gauge measures in watch lignes sizes and millimeters on one side, while the other side gives American watch movement sizes. For measuring the diameter (0 to 60 mm) or the number of ligne sizes (2 to 24) of a movement. Length: 108 mm.

MOVEMENT-GAUGE
$3.95
 

Latex cots for watchmaking, electronics or chemical work. 1 Dozen: $1.95, 1 Gross = 144pcs: $9.12, 10 Gross = 1440 pcs: $81.60.

BERG-5840-L
$1.95
 

Quantity	1 - 5	6 - 11	12 - 119	120+
Price	$1.95	$1.35	$0.76	$0.68

Black latex ESD safe finger cots for watchmaking, electronics or chemical work. These latex cots are antistatic and powder free. Diameter: 21 mm, Thickness 0.1 mm. 1 Dozen: $1.95, 1 Gross = 144pcs: $6.96, 10 Gross = 1440 pcs: $54.00.

MSA 26.268-L
$1.95
 

Quantity	1 - 11	12 - 119	120+
Price	$1.95	$0.58	$0.45

Allergic to latex finger cots? Well, we got the answer for you! Bergeon Nitrile Finger Cots are designed to eliminate the possibilities of an allergic response from latex. Many people don't know that they are allergic to latex, and when they finally figure out, it's too late. Go with this new Bergeon Nitrile thimbles anti-allergic finger cots when you need finger protection and be worry free of any allergic reaction. For watchmaking, electronics, chemical industries, etc. Nitrile finger cots are recommended for use by many professional associations instead of latex. 1 Dozen: $3.95, 1 Gross = 144 pcs: $19.80, 10 Gross = 1440 pcs: $168.00

BERG-5842-L
$3.95
 

Quantity	1 - 11	12 - 119	120+
Price	$3.95	$1.65	$1.40

Allergic to latex finger cots? Well, we got the answer for you! Bergeon Nitrile Finger Cots are designed to eliminate the possibilities of an allergic response from latex. Many people don't know that they are allergic to latex, and when they finally figure out, it's too late. Go with this new Bergeon Nitrile thimbles anti-allergic finger cots when you need finger protection and be worry free of any allergic reaction. For watchmaking, electronics, chemical industries, etc. Nitrile finger cots are recommended for use by many professional associations instead of latex. 1 Dozen: $3.95, 1 Gross = 144 pcs: $19.80, 10 Gross = 1440 pcs: $168.00.

BERG-5842-XL
$3.95
 

Quantity	1 - 11	12 - 119	120+
Price	$3.95	$1.65	$1.40

For those who don't want to scratch and damage their dials while removing hands, this Bergeon dial protector is the tool to use. It's made of resistant synthetic material. Thickness of 0.15 mm. Color is off white with Otto Frei Logo.

BERG-6938
$1.50
 

Quantity	1 - 9	10 - 99	100+
Price	$1.50	$1.20	$1.00
On Sale!	$1.30	$1.08	$0.91

For those who don't want to scratch and damage their dials while removing hands, this dial protector is the tool to use.

MSA 70.004
$1.50
 

Quantity	1 - 9	10 - 99	100+
Price	$1.50	$1.20	$1.00
On Sale!	$1.38	$1.08	$0.91

The Bergeon universal protection sheet can be used in many ways to protect your watch during repairs. Due to the flexibility and durability of the sheet, the sheet can be placed on top of the hands during removal to protect the dial and hands. The sheet can also be placed on the case back to prevent scratching by the case opener. Diameter of the sheet is 60mm. Swiss made.

BERG-7982-60
$3.70
 

Quantity	1 - 2	3 - 19	20 - 99	100+
Price	$3.70	$3.38	$2.80	$2.35

The Bergeon universal protection sheet can be used in many ways to protect your watch during repairs. Due to the flexibility and durability of the sheet, the sheet can be placed on top of the hands during removal to protect the dial and hands. The sheet can also be placed on the case back to prevent scratching by the case opener. Diameter of the sheet is 85mm. Swiss made.

BERG-7982-85
$3.70
 

Quantity	1 - 2	3 - 19	20 - 99	100+
Price	$3.70	$3.38	$2.80	$2.35

Tool used to help measure the correct spot of where to cut, when shortening a stem.

BERG-2002
$149.16
 

Specially designed glass bottle for Epilame. For use with Moebius-Fixodrop No 8940, 8941, 8950, 8951. Comes with bottle, cap, and basket.

BERG-7066
$239.00
 

A wonderful tool that sure looks good. Allows the pivots to be straightened without breaking due to a control device as well as a screw fitted with a stop. 41 Jewelled holes diam. 0.07 - 0.15 mm. Progression 0.025 mm. Bergeon reference #30350-D-02.

FB-743
$708.00
 

Bergeon hand gauge hole sizes .30 to 2.0 mm. Swiss made.

FB-100
$56.16
 

The expandable jaw automatically grips any size or shape of lock nut, hex nut, star nut, cap nut, or round nut. The Nut and Screw Grabber doubles as a screw starter! Placing a screw in the self-closing jaws makes it easy to thread even the smallest screw into the hardest to reach place. The more pressure you apply, the tighter the grip on the screw.

FB-13.450
$9.95
 

Simply apply & heat to fill cracks and chips on enamel dials. Before applying the dial enamel to the chipped and cracked areas you need to clean the dial as well as possible. Soap, water and a soft brush is an old time method. Others will now use an ultrasonic cleaner will a jewelry cleaning solution, which is different than watch cleaner used on the movement parts. After cleaning the dirt out of small cracks you might not notice them as much or at all. When the dial is fully cleaned, completely dried, oil and dust free you are now ready to apply the dial enamel material. Place a small amount over the crack or chipped area where you see the metal showing. You want to use just enough to fill the area when the enamel is melted. To heat the enamel over the low heat flame of an alcohol lamp until the enamel begins to warm, soon it will completely flow and fill the cracks and chipped places. You want to remove the dial from the heat before the enamel spreads to areas that you do not need or want it to flow. Excess dial enamel should then be removed and a new shape razor blade is recommended for the removal of excess material.

FB-120
$19.95
 

A horological sealing compound for ensuring a perfect final sealing film between: 1) watch case backs and cases. 2) watch glasses and cases. The Magic Seal leaves a protective, rubbery seal. Guarantees perfect seal to prevent dust, humidity entering the watch. The item is inert, non-toxic, non-corrosive. Completely colorless, invisible after drying. Can be used on any type of case and glass. Rapid and easy application with built-in brush. Ideal for antique and vintage watches especially square or rectangular shapes. Economical, long lasting, shelf life many years if properly closed.

MSA 26.655
$19.95
 

Black latex ESD safe finger cots for watchmaking, electronics or chemical work. These latex cots are antistatic and powder free. Diameter: 15 mm, Thickness 0.1 mm. 1 Dozen: $1.95, 1 Gross = 144pcs: $6.96, 10 Gross = 1440 pcs: $54.00.

MSA 26.268-S
$1.95
 

Quantity	1 - 11	12 - 119	120+
Price	$1.95	$0.58	$0.45

Black latex ESD safe finger cots for watchmaking, electronics or chemical work. These latex cots are antistatic and powder free. Diameter: 18 mm, Thickness 0.1 mm. 1 Dozen: $1.95, 1 Gross = 144pcs: $6.96, 10 Gross = 1440 pcs: $54.00.

MSA 26.268-M
$1.95
 

Quantity	1 - 11	12 - 119	120+
Price	$1.95	$0.58	$0.45

Black latex ESD safe finger cots for watchmaking, electronics or chemical work. These latex cots are antistatic and powder free. Diameter: 24 mm, Thickness 0.1 mm. 1 Dozen: $1.95, 1 Gross = 144pcs: $6.96, 10 Gross = 1440 pcs: $54.00.

MSA 26.268-XL
$1.95
 

Quantity	1 - 11	12 - 119	120+
Price	$1.95	$0.58	$0.45

Bergeon developed and designed this tool to straighten tips on tweezers. Comes with two different tweezers holders with the ability to adjust the length. Ends of the holders have a screw on or off collet making inserting of tweezers easier. Slide the holder in the base while the tips contact the stone.

BERG-4985
$189.00