Quartz Clock Push-On Hands Movement with no Bushings QM60| |
Total Shaft length is 5/8" (16 mm), For a Maximum Dial Thickness up to 5/16" (8 mm).
Exclusively for those who have a case back molded to "clip" in the 2 7/32 " (56 mm) sq. by 5/8" (16 mm) thick movement. No hardware needed, just snap in and push on the hands.
Requires 1 AA battery. No Hardware.
| |
QM60
$8.95
|
Quartz Clock Push-On Hands Movement with no Bushings QM65| |
Total Shaft length is 1/16" (4 mm), Maximum Dial Thickness up to 1/8" (3 mm). Total
Exclusively for those who have a case back molded to "clip" in the 2 7/32 " (56 mm) sq. by 5/8" (16 mm) thick movement. No hardware needed, just snap in and push on the hands.
Requires 1 AA battery. No Hardware.
| |
QM65
$8.95
|
Quartz Clock Push-On Hands Movement with Threaded Shaft for Up To 3 mm Thick Dial
| |
A push on hands movement that has a threaded shaft and comes with screw on nut to secure the movement tightly to the dial.
Maximum dial thickness: 1/8" (3 MM). Total Shaft length is 7/16" (11 mm). Total hand shaft length: 1/2" (13 MM).
Exclusively for those who have a case back molded to "clip" in the movement that is 2 7/32 " (56 mm) sq. by 5/8" (16 mm) thick movement..
Requires 1 AA battery. Push-on Hands
| |
CLK-10070
$8.95
|
Quartz Clock Push-On Hands Movement with Threaded Shaft for Up To 6 mm Thick Dial
| |
A push on hands movement that has a threaded shaft and comes with screw on nut to secure the movement tightly to the dial.
Maximum dial thickness: 1/4" (6 MM). Total Shaft length is 5/8 " (16 mm). Total hand shaft length: 3/4" (19 MM).
Exclusively for those who have a case back molded to "clip" in the movement that is 2 7/32 " (56 mm) sq. by 5/8" (16 mm) thick movement.
Requires 1 AA battery. Push-on Hands
| |
CLK-10074
$8.95
|
