Otto Frei.
Quality Jewelry Supplies for Generations - Since 1930
Contact UsHome Search for Products About Us

Bergeon Crystal Press and Bergeon Watch Case Closers

   

Bergeon 5500 Crystal & Case Closing Press Only No Dies

Press Only, No Dies No Stand.

BERG-5500
$249.00

order.gif  checkout.gif

   

Bergeon 5500-C Crystal & Case Closing Press With Dies on Stand

Bergeon Crystal Press with screw on dies to fit Tension Ring Crystals and to close Snap-Back Watch Cases. Comes with 9 reversible dies 18-35 mm, 1 universal flat stake, press and wood base (dimensions: 200 x 150 mm.)

5500-C
$396.95

order.gif  checkout.gif

   

Bergeon 5500A Crystal Press

Fit plastic and glass crystals, along with closing snap-back watch cases. Standard Bergeon press complete with 31 metal dies, more dies available.

On wooden stand (dimensions: 370 x 150 mm). Outfit consisting of: - 1 press No 5500. - 1 set of 9 stakes No 5500-E. - 1 set of 12 stakes No 5500-10 to No 5500-21. - 1 set of 9 stakes No 5500-22 to No 5500-30. - 1 lower stake No 5500-31. - 1 support No 5500-T28.

5500A
$599.95

order.gif  checkout.gif

   

Bergeon 8250 NEW Precision Screw Device For Crystals & Snap Back Cases

Once again, Bergeon has listened to the needs of the watch repair industry servicing luxury watches. Bergeon already has the largest selection of screw-on dies, what was needed from Bergeon a truly precision straight screw press to go with the dies Bergeon makes. Well, it's here now Swiss Made with Anodized aluminum frame with non-slip base that can be bolted down if desired. Truly Linear Spindle with Anti-rotation, allow for a straight traveling path while controlling precisely the distance the dies moves downward. Compatible with the complete range of Bergeon and Bergeon type screw-on dies. Supplied with die holder height 21 mm, optional die holders in heights 5 mm and 28 mm are available.

BERG-8250
$416.00

order.gif  checkout.gif

   

Bergeon 6173 Rack Press

Uses same dies as 5500. Fits all types of plastic crystals and now used by many to fit flat mineral glass crystals, along with closing pressure back waterproof snap type case backs. Delivered with two die support reduction ring (6173-R), one upper threaded die support (6173-ST2), and one lower threaded die support (5500-T21).

BERG-6173
$769.95

order.gif  checkout.gif

   

Bergeon 6173-B Micrometric Stop for Rack Press

Easy adaptation on the press No 6173. Anodized aluminium. Adjustment by micrometric screw in hardened and tempered steel. Precision control in graduations of 0.01mm is now available for the Rack Press. Peace of mind is now possible when using the powerful rack press.

BERG-6173-B
$367.32

order.gif  checkout.gif

   
Bergeon Threaded Lower Die Support 5500-T05

Thread lower die support with 5 mm collar height. Fits 5500 crystal press and 6173 rack press.

BERG-5500-T05
$12.25

order.gif  checkout.gif


   
Bergeon Threaded Lower Die Support 5500-T28

Thread lower die support with 28 mm collar height. Fits 5500 crystal press and 6173 rack press.

BERG-5500-T28
$12.25

order.gif  checkout.gif


   
Bergeon Upper Threaded Die Support 6173-ST2

Threaded upper die support for 6173 rack press

BERG-6173-ST2
$12.95

order.gif  checkout.gif


   

Bergeon Set of 5 Jumbo Size Delrin Tapered Dies 6527-5CP-XL

Assortment of 5 jumbo size tapered delrin stakes. M6 thread without brass core. Thickness is 16 mm. Use to fit DOMED crystals and closing waterproof snap back cases. Includes sizes 45 mm, 50 mm, 55 mm, 60 mm, and 65 mm. Fits Bergeon 6173 Rack-Press, Bergeon 5500 Press and all presses that take the Bergeon Screw-on dies. Side-wall thickness measures 5.05 mm. Tapered at top followed by 3.00 mm straight side-wall to inner base for DOMED crystals.

BERG-6527-5CP-XL
$142.00

order.gif  checkout.gif

   

Bergeon Set of 4 Jumbo Size Reversible Tapered Dies 5500-04-XL

The dies are reversible (each piece has two different sizes, one on each side). Assortment includes Bergeon 5500-39-E (52 x 50 mm), 5500-40-E (56 x 54 mm), 5500-41-E (60 x 58 mm), and 5500-42-E (64 x 62 mm). For fitting big size crystal types. Made of duraluminum. Fits Bergeon 6173 Rack-Press, Bergeon 5500 Press and all presses that take the Bergeon Screw-on dies. Tapered from top to inner base without any straight side-walls.

BERG-5500-04-XL
$112.00

order.gif  checkout.gif

   

Bergeon Set of 5 Jumbo Size Delrin Flat Dies 6527-5P-XL

Assortment of 5 jumbo size delrin flat stakes. M6 thread without brass core. Use to fit mineral crystals and closing waterproof snap back cases. Includes sizes 45 mm, 50 mm, 55 mm, 60 mm, and 65 mm. Fits Bergeon 6173 Rack-Press, Bergeon 5500 Press and all presses that take the Bergeon Screw-on dies.

BERG-6527-5P-XL
$142.00

order.gif  checkout.gif

   

Bergeon Set of 6 Hollow Hardened PVC Dies 6527-6-CP

Use to fit domed mineral crystals and closing waterproof snap back cases. Includes tapered side wall dies sizes 19 mm, 22 mm, 26 mm, 30 mm, 35 mm, and 40 mm. Fits Bergeon 6173 Rack-Press, Bergeon 5500 Press and all presses that take the Bergeon Screw-on dies.

BERG-6527-6-CP
$127.00

order.gif  checkout.gif

   

Bergeon Set of 11 Reversible Lower Stakes For Crystal & Case Presses

These Bergeon lower stakes dies are reversible (each piece has two different sizes, one on each side). Comes in a set of 11 pieces. For fitting certain crystal and case closing.

Assortment includes Bergeon 5500-38 (36 x 34 mm), 5500-22 (33 x 32 mm), 5500-23 (31 x 30 mm), 5500-24 (29 x 28 mm), 5500-25 (27 x 26 mm), 5500-26 (25 x 24 mm), 5500-27 (23 x 22 mm), 5500-28 (21 x 20 mm), 5500-29 (19 x 18 mm), 5500-30 (17 x 15 mm), and 5500-36 (14 x 12 mm).

BERG-5500-K
$134.00

order.gif  checkout.gif

   

Bergeon Set of 6 Flat Hardened PVC Dies 6527-6-P

Use to fit mineral crystals and closing waterproof snap back cases. Includes sizes 19 mm, 22 mm, 26 mm, 30 mm, 35 mm, and 40 mm. Fits Bergeon 6173 Rack-Press, Bergeon 5500 Press and all presses that take the Bergeon Screw-on dies.

BERG-6527-6-P
$127.00

order.gif  checkout.gif

   

Bergeon Set of 13 Tapered Wall Dies For Crystal & Case Presses

These Bergeon tapered wall dies are reversible (each piece has two different sizes, one on each side). Comes in a set of 13 pieces. For fitting certain crystal types, including tension rings.

Assortment includes Bergeon 5500-37 (48 x 46 mm), 5500-10 (44 x 42 mm), 5500-11 (40 x 38 mm), 5500-12 (35 x 34 mm), 5500-13 (33 x 32 mm), 5500-14 (31 x 30 mm), 5500-15 (29 x 28 mm), 5500-16 (27 x 26 mm), 5500-17 (25 x 24 mm), 5500-18 (23 x 22 mm), 5500-19 (21 x 20 mm), 5500-20 (19 x 18 mm), 5500-21 (17 x 15 mm).

BERG-5500-J
$174.00

order.gif  checkout.gif

   

Bergeon Set of 9 Bakelite Lower Stake Dies

Comes in a set of 9 bakelite lower stake dies. Assortment includes Bergeon 5500-01 (40 mm), 5500-02 (36 mm), 5500-03 (32 mm), 5500-04 (28 mm), 5500-05 (24 mm), 5500-06 (20 mm), 5500-07 (16 mm), 5500-08 (14 mm), and 5500-09 (12 mm).

BERG-5500-E
$76.50

order.gif  checkout.gif

   

Bergeon Assortments of 15 Dies with Straight Edges

These stakes are reversible. For fitting certain bezels and closing snap back cases. Made with duraluminium.

This 15 piece assortment comes with Bergeon 5499-Q (36.5 x 36 mm), 5499-P (35.5 x 35 mm), 5499-A (34.5 x 34 mm), 5499-B (33.5 x 33 mm), 5499-C (32.5 x 32 mm), 5499-D (31.5 x 31 mm), 5499-E (30.5 x 30 mm), 5499-F (29.5 x 29 mm), 5499-G (28.5 x 28 mm), 5499-H (27.5 x 27 mm), 5499-J (26.5 x 26 mm), 5499-K (25.5 x 25 mm), 5499-L (24.5 x 24 mm), 5499-M (23.5 x 23 mm), and 5499-N (22.5 x 22 mm).

BERG-5499-15
$241.95

order.gif  checkout.gif

   
Bergeon Assortments of 8 Dies with Straight Edges

These stakes are reversible. For fitting certain bezels and closing snap back cases. Made with duraluminium.

This 8 piece assortment comes with Bergeon 5499-A (34.5 x 34 mm), 5499-B (33.5 x 33 mm), 5499-C (32.5 x 32 mm), 5499-D (31.5 x 31 mm), 5499-E (30.5 x 30 mm), 5499-F (29.5 x 29 mm), 5499-G (28.5 x 28 mm), and 5499-H (27.5 x 27 mm).

BERG-5499-08
$156.00

order.gif  checkout.gif


   

Favorite Assortments of 8 Dies with Straight Edges
$98.00
FAVORITE-DIES-11.012
Favorite, was at one time the biggest supplier of watch tools worldwide. This new old stock set of Swiss made dies is the same as the Bergeon 5499-08 set of dies.

These stakes are reversible, and are used for fitting bezels along with tension ring crystals on certain divers watches and for closing snap back cases. Swiss Made with duraluminium. Sizes (34.5 x 34 mm), (33.5 x 33 mm), (32.5 x 32 mm), (31.5 x 31 mm), (30.5 x 30 mm), (29.5 x 29 mm), (28.5 x 28 mm), (27.5 x 27 mm).

Will fit on all Bergeon and Horotec presses using screw-on dies.



   

Bergeon 7499-A Assortment of Reversible Synthetic Dies with Straight Edges

Comes in an assortment of 13 reversible synthetic dies with straight edges for fitting certain bezels and closing snap back cases. Assortment includes 7499-22/23 (22 x 23 mm), 7499-24/25 (24 x 25 mm), 7499-26/27 (26 x 27 mm), 7499-28/29 (28 x 29 mm), 7499-30/31 (30 x 31 mm), 7499-32/33 (32 x 33 mm) 7499-34/35 (34 x 35 mm), 7499-36/37 (36 x 37 mm), 7499-38/39 (38 x 39), 7499-40/41 (40 x 41 mm), 7499-42/43 (42 x 43 mm), 7499-44/45 (44 x 45 mm), 7499-46/47 (46 x 47 mm).

Fits Bergeon 6173 Rack-Press, Bergeon 5500 Press and all presses that take the Bergeon Screw-on dies.

BERG-7499-A
$241.00

order.gif  checkout.gif

 

Individual Bergeon Lower Dies / Stakes, For Crystal & Case Presses

Click Here for Lower Individual Reversible Stakes and Dies for Bergeon 6173 Rack-Press, Bergeon 5500, 8250 presses and all presses that take the Bergeon Screw-on dies.
 

Bergeon Tapered Wall Dies, For Crystal & Case Presses

Click Here for Individual Reversible Stakes and Dies with Tapered Wall for Bergeon 6173 Rack-Press, Bergeon 5500 Press and all presses that take the Bergeon Screw-on dies.
 

Bergeon Individual Sizes Straight Edge Wall Crystal & Case Press Dies

Click Here for Individual Sizes of Dies with Straight Edges for Bergeon 6173 Rack-Press, Bergeon 5500 Press and all presses that take the Bergeon Threaded Screw-on Dies including the Horotec Presses for for Threaded Dies.


 

Bergeon Bakelite Lower Stake Dies For Crystal & Case Presses

Click Here for Individual Bakelite Stakes and Dies for Bergeon 6173 Rack-Press, Bergeon 5500 Press and all presses that take the Bergeon Screw-on dies.
 

Crystal Press & Case Closers

   

Sternkreuz Nr. 98 Die Set

Now you need dies for your new QuickPress 800. These German-made dies are perfect match, from 17.5 - 46 mm, with four special plastic dies for mineral glass and fancy shaped crystals.

FB-2205
$586.00

order.gif  checkout.gif

   

Sternkreuz German Made Die Set

Set of 20 thrust pieces, 3 steel supports for tapered dies, and 3 plastic dies for mineral crystals.

FB-2206
$489.00

order.gif  checkout.gif

www.ofrei.com
Otto Frei, Watch Parts Since 1930
Customers Entrance
126 2nd St. Oakland, California 94607
Mailing Address: PO BOX 796, Oakland Ca. 94604
Freight Shipment Address: 119 3rd St. Oakland Ca. 94607 USA


Home   |  About Us   |  Specials   |  Contact Us   |  Search

Click here to send email

For stock checks on watch parts not listed on the site please call the watch material department at 510-832-0355 ext 2., Monday to Friday 9 AM to 5 PM Pacific Standard Time Zone.
Stock Checks For Watch Movement & Watch Case Parts

Security/Privacy/Return Policy

United States
510.832.0355 EXT. 2
800.900.3734 (fax)

International
510.832.0355 EXT. 2
510.834.6217 (fax)