French Made Bezel Remover MSA 07.117 |
Equipped with 4 polished knives, this tool makes it easy for removing most bezels on watch cases. This is really a high quality by European standards made in France is crafted much better than the 180.701 above that has service the trade well for many years. However, if you want the best possible tool of this type on your bench the only choice then would be this French Made tool.
| |
MSA 07.117 $329.00

|
Bergeon 6820 Bezel Remover |
Bergeon, Swiss-Made case bezel remover is designed to work on Rolex watches, also works with many other divers-type watch cases. This is the finest product of it's type. Citizen Watch Company is just one of many of our customers to purchase this tool from us. Removes bezel sizes from 27 mm to 45 mm in diameter.
| |
FB-709 $389.95

|
Horotec Snap Back Case Opener, Bezel and Bracelet Pin Remover |
Horotec tool for opening snap back cases as well as removing bezels. Can also be used to remove pins from bracelet links. Equipped with 2 pairs of hardened steel blades (2mm and 4mm), 1 delrin support die, 1 pin holder, assortment of 11 pins (sizes: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.10, 1.20, 1.40, 1.50, 2.00mm) and a precision sliding carriage for extracting glasses and case backs. Has a maximum opening of 45mm. Size: 120mm x 75mm x 85mm.
| |
MSA 07.115
$319.95

|
Horotec Large Snap Back Case Opener & Bezel Remover |
Horotec tool for opening snap back cases as well as removing bezels. Can also be used to remove pins from bracelet links. Equipped with 2 pairs of hardened steel blades (2mm and 4mm), 1 delrin support die, 1 pin holder, assortment of 11 pins (sizes: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.10, 1.20, 1.40, 1.50, 2.00mm) and a precision sliding carriage for extracting glasses and case backs. Has a maximum opening of 60mm. Size: 155mm x 100mm x 110mm.
| |
MSA 07.119
$469.95

|

Click Here For Replacement Accessories For Snap Back Case Opener & Bezel Remover
Click Here for Replacements and Add-On Accessories.
|
Horotec Counter Clockwise Spinning Polisher MSA 23.502 |
Ball bearing handle with left sided vice (counter clockwise spin).
Polishing system developed for the watch industry and particularly for finishing watch cases. This tool includes a vice with 4 brass jaws (tightening from diameter 14 to 34 mm) mounted on ball bearings to allow polishing without the risk of any flattening on the item being worked on (watch cases, bezel, case back, ring, etc.). As soon as the item comes in contact with the brush, the polisher starts turning at the same speed as the brush.
Special order item. Please allow 4-6 weeks for deliver.
| |
MSA 23.502 $789.00

|
Horotec Clockwise Spinning Polisher MSA 23.501 |
Ball bearing handle with right sided vice (clockwise spin).
Polishing system developed for the watch industry and particularly for finishing watch cases. This tool includes a vice with 4 brass jaws (tightening from diameter 14 to 34 mm) mounted on ball bearings to allow polishing without the risk of any flattening on the item being worked on (watch cases, bezel, case back, ring, etc.). As soon as the item comes in contact with the brush, the polisher starts turning at the same speed as the brush.
Special order item. Please allow 4-6 weeks for deliver.
| |
MSA 23.501 $789.00

|
Horotec 23.503 Universal Tool for Polishing Case Backs & Bezels |
This polishing tool is used for finishing watch cases, bezels, rings, case backs and more. Equipped with 4 brass jaws that opens from 25 mm to 50 mm in diameter to handle larger case backs.
Manual Use: Attach item to polish onto the jaws. Hold tool on one hand and polish piece with a cleaning cloth with the other without ever touching the item. Gently lay down the item onto a clean cloth and loosen the jaws to release the piece.
Motor Use: Attach item to polish onto the jaws. Fix the tool onto a 13.90 mm polishing motor arbor and tighten it with 2 screws using the provided hexagonal key. Make sure all parts are safely tighten before turning on the machine. While motor is spinning, apply buff or cleaning cloth gently onto the piece to polish as desired.
| |
MSA 23.503 $268.20

|
Rubber Grip Pocket Watch Case Back & Bezel Remover | This is the tool that you use to open and close screw back cases and bezels on pocket watches. Use either side fits pocket watches sizes O to 18. This is a must have tool, that everybody opening pocket watches really needs.
| |
159.048-FB269 $4.95

|
Rubber Bezel Remover For Rotating Bezels |
New simple and safe to use tool for removing rotating bezels from certain watch cases. Very easy to use just is twist in opposite direction of the rotation and pull to remove the bezel. Only For Rotating Bezels
| |
MSA 07.031 $26.95

|
Bergeon 7052 Set of 6 Rotating Bezel Removers |
Ergonomic handle in anodized aluminum with adjustable screw in end of banking to avoid crushing the Bezel. New internal ring in synthetic material allowing the easy extraction of all kinds of rotating Bezels without scratching. Assortment of 6 pieces. Interior Ø of ring: 30 - 34 - 38 - 42 - 46 - 50 mm. External Ø of the handle: 80 mm.Special order item allow 4-5 weeks for delivery. Final billing of credit card charge does not take place until we are able to ship.
| |
BERG-7052 $889.95

|
The FERCAL 1006 Bezel Adjusting Tool |
The Bezel is giving you problems, it's too lose and the watch is not passing the waterproof test. With this tool you will be able to tighten safely the bezel and now it can pass the waterproof test. If the Bezel is too tight which can result in cracked crystals, you will also be able loosen the bezel with this tool. Extremely well made tool that can even handle even more sizes than the luxury brands own tool at a fraction of the cost of their tool!

Supplied with a plastic case together with the instructions. | | FERCAL-1006 $1,195.00

|