Bergeon Pin Vise Set, First-Quality| | This assortment of first-quality pin vises is a must for any serious watchmaker who can afford them. These often-used tools are beautifully machined and finished. Each handle except the smallest size is provided with two different bits, one in use, the other in the back of the handle. This is another one of those indispensables. | |
FB-762
$142.00
|
Bergeon Pin Vise 0.50 to 0.70 mm, First-Quality | | Round head, the chuck is hardened steel and the handle is Chromium plated. Overall length 80 mm, opens from .50 to 0.70 mm. | |
BERG-30021-1
$32.80
|
Bergeon Pin Vise 0.5 to 1.5 mm, First-Quality | | Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm.
| |
BERG-30022-2
$33.60
|
Bergeon Pin Vise 1.0 to 2.0 mm, First-Quality | | Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 100 mm, opens on one end from 1.0 mm to 1.50 mm on the other end 1.5 mm to 2.0 mm.
| |
BERG-30023-3
$33.60
|
Bergeon Pin Vise 2.0 to 3.0 mm, First-Quality | |
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 120 mm, opens on one end from 2.0 mm to 2.50 mm on the other end 2.5 mm to 3.0 mm. | |
BERG-30024-4
$35.50
|
Bergeon Pin Vise 3.0 to 4.0 mm, First-Quality | | Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 130 mm, opens on one end from 3.0 mm to 3.50 mm on the other end 3.5 mm to 4.0 mm.
| |
BERG-30025-5
$32.30
|
Good Quality Pin Vise Set| | This Bergeon 1842B, Swiss-made pinvise set includes four handles, each of which carries two bits (one in the back end of the handle). Pinvises are needed for many tasks, just try to install a crown on a stem or get a grip on a barrel arbor without a pinvise. A watchmaker needs a range of sizes and this set covers sizes up to 5 mm this is a very decent set at a decent price. Constructed of nickel-plated brass, this set is bettered only by Bergeon's first-quality set, FB-762. | |
FB-717
$64.00
|
Bergeon 4072 Pin Vise for Holding HairspringsFB-742
$24.20
|
Sliding-Lock Pin Vise| | This Bergeon pin vise uses a slide lock for the steel jaws. The body of the tool is nickel-plated brass. The opening is 0.0 to 1.5 millimeter. Sometimes the conventional pinvise with rotating collar is difficult to use in one-handed operation. The sliding-lock design of this tool is the perfect, sometimes indispensable, solution. I have one and use it a lot. | |
FB-763
$14.80
|
Bergeon Pin Vise # 5860| | Again like number 1841, this is a very normal quality pin vise with two reversible chucks. Opening from 0-2.1, 1.9-3 mm, length 108 mm. | |
BERG-5860
$18.95
|
Bergeon Pin Vise #1841| | This is a very normal quality pin vise with two chucks. Opening from 0-1.2, 2.3-3 mm, length 100 mm. | |
BERG-1841
$15.20
|
Bergeon Pin Vise #6514| |
Pin vice for shortening winding stems. With adjustable stop. Length: 100 mm. Opening: 0 - 1 mm. Only for winding stems of quartz watches.
| |
BERG-6514
$25.95
|
Round Head Good Quality Pin Vise Set| | Same as FB-717, except for round heads instead of flat heads. | |
BERG-1842A
$60.00
|
Bergeon Barrel Arbor Holder Diameter 1.50 mmBERG-30610-15
$55.00
|
Bergeon Barrel Arbor Holder Diameter 1.00 mmBERG-30610-1.00
$55.00
|
