Parts for SELLITA SW200-1
|
Parts for SELLITA SW220-1
|
Standard Balance Complete Found in Sellita SW210-1| | Also for SW200-1, SW220-1 and more calibers.
Balance Completes are sold without balance bridge attached. This is the normal way all balance completes are sold. | |
SW210-1#721
$48.00
|
ETA 2801-2, 2836-2, 2804-2, Clutch Wheel Also called "Sliding Pinion"| | ETA 2821-2, 2824-2, 2834-2, 2846 This Clutch Wheel is also for Sellita SW200-1, SW210-1, SW215-1, SW220-1 | |
407/1228
$8.80
|
SELLITA SW200-1 & ETA 2801-2 Pallet Fork & Arbor| |
Work also for 2836-2, SELLITA 210-1, SELLITA SW200-1, SELLITA SW220-1, SELLITA SW240-1, SW260-1 and many other calibers. BUL 1373 30, BUL 1373.11, BUL 1373.50, BUL 1412.11, BUL 1413.10, BUL 1413.11,
BUL 1413.30, ETA 2801, ETA 2801-1, ETA 2801-2, ETA 2804, ETA 2804-1, ETA 2804-2, ETA 2805, ETA 2806, ETA 2807, ETA 2810, ETA 2811, ETA 2812, ETA 2813, ETA 2816, ETA 2816-1, ETA 2817, ETA 2819, ETA 2821, ETA 2821-1, ETA 2821-2, ETA 2821R, ETA 2824, ETA 2824-1, ETA 2824-2, ETA 2824R, ETA 2825, ETA 2825R, ETA 2826, ETA 2827, ETA 2827R, ETA 2830, ETA 2830R, ETA 2831,
ETA 2831R, ETA 2832, ETA 2832R, ETA 2834, ETA 2834-1, ETA 2834-2, ETA 2834R, ETA 2836, ETA 2836-2, ETA 2836R, ETA 2837,
ETA 2837R, ETA 2838, ETA 2838R, ETA 2839, ETA 2839R, LON 631.1, LON 632.1, LON 632.2, LON 633.1, LON 633.2, LON 634.1, LON 634.2, LON 636.1, LON 636.2, MOV 341, TIS 3103, TIS 3104, TIS 3108, ETA 2836-1,
| |
710/1300
$24.80
|
Extra Long 20 mm Stem for Sellita SW210-1|
|
Also for Sellita SW200-1, SW215-1, SW220-1, SW240-1 & SW260-1. Also interchangeable with ETA stem series 2801-2 etc. If your going to re-case or casing a movement into a 42 mm or larger case, a this 20 mm long stem may be necessary. A standard 16 mm long stem comes installed by the factory on all new movements.
| |
401/1543-SEL
$4.95
|
Incabloc , Complete Upper Setting for Sellita and ETA Movements
| |
One complete upper setting (complete with hole jewel, cap jewel & spring) Sellita SW200-1, SW210-1, SW220-1, ETA 2801-2, 2804-2, 2824-2, 2834-2 and 2836-2.
| |
FB-10019
$18.00
|
Incabloc 173.20 , Complete Lower Setting for ETA and Sellita Movements| | One complete lower setting (complete with hole jewel, cap jewel & spring), Sellita SW200-1, SW210-1, SW220-1, ETA 2801-2, 2804-2, 2824-2, 2834-2 and 2836-2. | |
FB-10020
$16.00
|
Main Plate For Sellita SW210-1 Ebauches #100SW210-1#100
$26.00
|
Sellita 210-1 Barrel Bridge Part #105
$20.00
SW210-1#105
|
SELLITA SW210-1 4th Wheel #227 Height 2, 5.07 mm| |
Standard Height Fourth Wheel for SELLITA SW210 movement and also fits SELLITA SW200-1, SW210-1, SW215-1, SW220-1 SW240-1, SW260-1 movements. SELLITA 4th wheels, Cannon Pinions, and Hour Wheels can be used in the ETA 2801-2, 2824-2, 2836-2 and related series of calibers.
| |
227/1294
$6.80
|
SELLITA SW210-1 4th Wheel #227 Height 4, 5.57 mm| |
Fourth Wheel for SELLITA SW200-1, SW210-1, SW215-1, SW220-1 SW240-1, SW260-1
SELLITA 4th wheels, Cannon Pinions, and Hour Wheels can be used in the ETA 2801-2, 2824-2, 2836-2 and related series of calibers.
| |
227/1292
$6.80
|
SELLITA SW210-1 4th Wheel #227 Height 5, 5.82 mm| |
Fourth Wheel for SELLITA SW200-1, SW210-1, SW215-1, SW220-1 SW240-1, SW260-1
SELLITA 4th wheels, Cannon Pinions, and Hour Wheels can be used in the ETA 2801-2, 2824-2, 2836-2 and related series of calibers.
| |
227/1291
$6.80
|
SELLITA SW210-1 4th Wheel #227 Height 6, 6.07 mm| |
Fourth Wheel for SELLITA SW200-1, SW210-1, SW215-1, SW220-1 SW240-1, SW260-1
SELLITA 4th wheels, Cannon Pinions, and Hour Wheels can be used in the ETA 2801-2, 2824-2, 2836-2 and related series of calibers.
| |
227/1290
$6.80
|
SELLITA SW210-1 4th Wheel #227 Height 7, 6.32 mm| |
Fourth Wheel for SELLITA SW200-1, SW210-1, SW215-1, SW220-1 SW240-1, SW260-1
SELLITA 4th wheels, Cannon Pinions, and Hour Wheels can be used in the ETA 2801-2, 2824-2, 2836-2 and related series of calibers.
| |
227/1289
$6.80
|
SELLITA SW210-1 Balance Bridge Assembled Part #121| |
The balance bridge assembled, contains the bridge along with the stud support, regular head assembled, regulator pointer, regular corrector and jeweled upper incablo shock unit. Also for SELLITA SW215-1
| |
SW210-1#121
$26.00
|
SELLITA SW210-1 Cannon Pinion #242 Height 2, 2.20 mm| |
Height 2 is standard height for the SELLITA 210-1 movement and is also for the SW200-1, SW210-1, SW215-1, SW220-1, SW240-1, SW260-1 movements.
SELLITA Cannon Pinions, 4th wheels and Hour Wheels can be used in the ETA 2801-2, 2824-2, 2836-2 and related series of calibers.
| |
245/1579
$6.15
|
ETA 2801-2, 2824-2 HT. 3 Cannon Pinion 2.45 mm| |
This is the height #3 Cannon Pinion for the SELLITA SW200-1, SELLITA SW210-1, SELLITA SW215-1, SELLITA 220-1, SW240-1, SW260-1, ETA 2801-2, ETA 2824-2 and some ETA 2836-2.
ETA call this Height #3 for the base model and is meant to be used in movements fitted with the Ht. #3 Hour Wheel and Ht. #3 Fourth Wheel.
| |
245/897
$8.80
|
SELLITA SW210-1 Cannon Pinion #242 Height 4, 2.70 mm| |
For Sellita SW200-1, SW210-1, SW215-1, SW220-1, SW240-1, SW260-1 movements.
SELLITA Cannon Pinions, 4th wheels and Hour Wheels can be used in the ETA 2801-2, 2824-2, 2836-2 and related series of calibers.
| |
245/1578
$6.15
|
SELLITA SW210-1 Cannon Pinion #242 Height 5, 2.95 mm| |
For Sellita SW200-1, SW210-1, SW215-1, SW220-1, SW240-1, SW260-1 movements.
SELLITA Cannon Pinions, 4th wheels and Hour Wheels can be used in the ETA 2801-2, 2824-2, 2836-2 and related series of calibers.
| |
245/1576
$6.15
|
SELLITA SW210-1 Cannon Pinion #242 Height 6, 3.20mm| |
For Sellita SW200-1, SW210-1, SW215-1, SW220-1, SW240-1, SW260-1 movements.
SELLITA Cannon Pinions, 4th wheels and Hour Wheels can be used in the ETA 2801-2, 2824-2, 2836-2 and related series of calibers.
| |
245/1575
$6.15
|
SELLITA SW210-1 Cannon Pinion #242 Height 7, 3.45mm| |
For Sellita SW200-1, SW210-1, SW215-1, SW220-1, SW240-1, SW260-1 movements.
SELLITA Cannon Pinions, 4th wheels and Hour Wheels can be used in the ETA 2801-2, 2824-2, 2836-2 and related series of calibers.
| |
245/1574
$6.15
|
SELLITA SW210-1 Hour Wheel #255 Height 2, 1.25 mm| |
Also for the SW200-1, SW215-1, SW260-1
SELLITA Cannon Pinions, 4th wheels and Hour Wheels can be used in the ETA 2801-2, 2824-2, and related series of calibers.
| |
255/1434
$4.95
|
ETA 2824-2 & SELLITA SW200-1 Ht. 3 Hour Wheel 1.50 mm
| |
ETA calls this Height #3 for this base model and the hour wheel is 1.50 mm. This height can be found on SELLITA SW200-1, SELLITA SW210-1, SELLITA SW215-1, SW260-1,ETA 2801-2, 2824-2. Use the Ht. 3 hour wheel with the Ht. 3 Cannon Pinion 2.45 mm and the Ht. 3 Fourth Wheel 5.32 mm
| |
255/746
$7.40
|
SELLITA SW210-1 Hour Wheel #255 Height 4, 1.75 mm| |
Also for the SW200-1, SW215-1, SW260-1
SELLITA Cannon Pinions, 4th wheels and Hour Wheels can be used in the ETA 2801-2, 2824-2, and related series of calibers.
| |
255/1432
$4.95
|
SELLITA SW210-1 Hour Wheel #255 Height 5, 2.00 mm| |
Also for the SW200-1, SW215-1, SW260-1
SELLITA Cannon Pinions, 4th wheels and Hour Wheels can be used in the ETA 2801-2, 2824-2 and related series of calibers.
| |
255/1444
$4.95
|
SELLITA SW210-1 Hour Wheel #255 Height 6, 2.25 mm| |
Also for the SW200-1, SW215-1, SW260-1
SELLITA Cannon Pinions, 4th wheels and Hour Wheels can be used in the ETA 2801-2, 2824-2, and related series of calibers.
| |
255/1431
$4.95
|
SELLITA SW220-1 Hour Wheel #255 Height 4, 1.75 mm| |
This is the normal height for SW220-1. Also for the SW240-1
SELLITA Cannon Pinions, 4th wheels and Hour Wheels can be used in the ETA 2836-2 and related series of calibers.
| |
255/1447
$4.95
|
SELLITA SW220-1 Hour Wheel #255 Height 5, 2.00 mm| |
Also for the SW240-1
SELLITA Cannon Pinions, 4th wheels and Hour Wheels can be used in the ETA 2836-2 and related series of calibers.
| |
255/1448
$4.95
|
SELLITA SW220-1 Hour Wheel #255 Height 6, 2.25 mm| |
Also for the SW240-1
SELLITA Cannon Pinions, 4th wheels and Hour Wheels can be used in the ETA 2836-2 and related series of calibers.
| |
255/1449
$4.95
|
SELLITA SW210-1 Center Tube #161| |
Also for SW200-1, SW215-1, Interchangeable with ETA 2801-2, ETA 2804-2, ETA 2824-2 Center Tube
| |
MIS/2704
$3.95
|
SELLITA SW210-1 Click #425SW210-1#425
$4.45
|
SELLITA SW210-1 Click Spring #430SW210-1#430
$3.95
|
SELLITA SW210-1 Clutch Lever "Yoke" #435| |
Also for SW200-1, SW215-1, SW220-1, SW240-1, SW260-1
| |
435/1032-SEL
$4.65
|
ETA 2801-2, 2804-2, 2836-2, Escape Wheel | | Fits many popular ETA calibers
2800, 2801, 2801-1, 2801-2, 2803, 2804, 2804-1, 2804-2, 2805, 2806, 2807, 2808, 2809, 2810, 2812, 2813. 2816, 2816-1, 2817, 2819, 2820, 2821, 2821-1, 2821-2, 2821R, 2822, 2824, 2824-1, 2824-2, 2824-A2, 2824R, 2825, 2825R, 2826, 2826R, 2827, 2827R, 2830, 2830R, 2831, 2831R, 2832, 2832R, 2834-1, 2834-2, 2834R, 2836, 2836-1, 2836-2, 2837, 2838, 2839. SELLITA SW200-1, SW210-1, SW220-1, SW240-1, SW260-1 Beneru K61D21
Bulova 1373.30, 1373.11, 1373.30, 1373.50, 1412.11, 1413.10, 1413.30
Hamilton 625
Longines 633, 633.5, 636, 636.5, 639.2, 640.1, 641.1
Lucien Picard 91E
Tissot 3103, 3104, 3108, 3152.
| |
705/1318
$15.95
|
SELLITA SW210-1 Complete Barrel w/Mainspring & ArborSW210-1#180/1
$22.95
|
SELLITA SW210-1 Crown Wheel #420SW210-1#420
$6.20
|
SELLITA SW210-1 Crown Wheel Core #423SW210-1#423
$5.80
|
Sellita SW210-1 Ebauches # 2570 Double Corrector Operating Lever| |
Also for SW200-1, SW215-1, SW220-1, SW240-1, SW260-1
| |
A/9912
$3.85
|
Sellita SW210-1 Great Wheel "Offset Center Wheel #201/1| |
Also for SELLITA SW200-1, SW220-1, SW240-1, SW260-1
| |
203/334
$7.90
|
SELLITA SW210-1 Minute Train Bridge Part #462SW210-1#462
$4.60
|
ETA 2801-2, Ebauches Part #5445 Set Bridge Screw | |
Set Bridge Screw For ETA 2801-2, 2804-2, 2824-2, 2834-2 and 2836-2.
This screw is also for the following calibers: Sellita SW200-1, SW210-1, SW215-1, SW220-1.
Also the date jumper guard screw Ebauches #52595 for ETA 2804-2, ETA 2824-2, 2834-2, 2836-2, Sellita SW200-1, SW215-1, SW220-1.
| |
5445/523
$3.95
|
SELLITA SW210-1 Set Bridge "Setting Lever Jumper" 2 Positions #445445/1564
$4.90
|
SELLITA SW210-1 Set Bridge "Setting Lever Jumper" 3 Positions #445| |
Also for SW215-1, SW200-1, SW220-1
| |
445/1563
$4.90
|
SELLITA SW210-1 #260 Minute Wheel SW210-1#260
$5.95
|
SELLITA SW210-1 Ratchet Wheel #415SW210-1#415
$6.15
|
SELLITA SW210-1 Screw for Ratchet Wheel #5415SW210-1#5415
$3.95
|
SELLITA SW210-1 Screw for Crown Wheel #5420SW210-1#5420
$3.95
|
SELLITA SW210-1 Setting Lever #443| |
Also for SW200-1, SW215-1, SW220-1, SELLITA SW240-1, SELLITA SW260-1
| |
443/1832
$4.65
|
SELLITA SW210-1 Setting Wheel #450| |
Also For SW200-1, SW210-1, SW215-1, SW220-1, SW240-1, and SW260-1
| |
450/1378
$4.80
|
SELLITA SW210-1 Third Wheel #210| |
Also for SW200-1, SW220-1, SW240-1
| |
210/1733
$9.20
|
Clutch Wheel for ETA 2801-2, 2836-2, 2804-2 Also called "Sliding Pinion"| | ETA 2821-2, 2824-2, 2834-2, 2846 This Clutch Wheel is also for Sellita SW200-1, SW210-1, SW215-1, SW220-1 | |
407/1228
$8.80
|
SELLITA SW210-1 Train Bridge Part #110SW210-1#110
$18.00
|
SELLITA SW200-1 #260 Minute Wheel
| |
This minute wheel is for the following SELLITA calibers SW200-1, SW210-1, SW215-1, SW220-1, SW240-1 and SW260-1
| |
260/1471
$4.15
|
SELLITA SW210-1 Screw # 5105 For Barrel Bridge| | This screw also is for the Train Wheel Bridge #110, Balance Bridge #121 and the Pallet Bridge, on the SELLITA SW200-1, SW210-1, SW215-1, SW220-1, SW240-1, SW260-1.
| |
SW210-1#5105
$3.95
|
SELLITA SW210-1 #410 Winding Pinion| |
Also for the Sellita watch movements SW200-1, SW210-1, SW215-1, SW220-1, SW240-1, SW260-1 AND ETA 2824-2 SERIES
| |
410/1375-SEL
$6.95
|
SELLITA SW200-1 #420 Crown Wheel | |
Also for SELLITA SW220-1, SELLITA SW240-1, SELLITA SW260-1
| |
420/1363
$4.65
|
SELLITA SW200-1 #5420 Screw for Crown Wheel | |
Also for SELLITA SW220-1, SELLITA SW240-1, SELLITA SW260-1
| |
SW200-5420
$3.95
|
SELLITA SW200-1 # 430 Clickspring | |
SELLITA SW220-1, SELLITA SW200-1, SEL SW240-1, SEL SW260-1, SEL SW260
| |
430/1081
$3.95
|
SELLITA SW200-1 # 425 Click| |
SELLITA SW220-1, SELLITA SW200-1, SELLITA SW240-1, SELLITA SW260-1,
| |
425/954-SEL
$6.10
|
SELLITA SW200-1 # 5415 Ratchet Wheel Screw
| |
For SELLITA SW200-1, SW210-1, SW215-1, SW220-1, SW240-1, SW260-1
| |
5415/648-SEL
$3.65
|
SELLITA SW200-1 #105 Barrel Bridge | |
Also for SELLITA SW220-1, SW240-1, SW260-1
| |
SW200-1#105
$20.00
|
SELLITA SW200-1 #125 Pallet Bridge | |
Also for SW210-1, SW215-1, SW220-1
| |
MIS/5150
$8.95
|
SELLITA SW 200 #9433 Balance Stop Lever (Slang term Hack)
| |
Balance Stop Lever is also called a hack lever, the offical Swiss Ebauches part number is 9433. The same stop lever found in the Sellita SW210-1, SW220-1, SW200-1, and many ETA calibers.
A second image and another view to take at look at!
| |
A/7071-SEL
$4.65
|
ETA 2801-2, 2804-2, 2824-2, 2836-2 Fourth Wheel SS HT. #3, 5.32 mm| | Can be used with the SELLITA SW200-1, SELLITA SW210-1, SELLITA SW215-1, SELLITA 220-1, SW240-1, SW260-1, ETA 2801, 2801-1, 2801-2, 2804, 2804-1, 2804-2. ETA calls this Height #3, for the base model and goes with a Ht. #3 Cannon Pinion 2.45 mm and Ht. #3 Hour Wheel 1.50 mm.
| |
227/750
$12.80
|
Dial Rest Ebauches # 145 Dial Support Ring | |
Also for BUL 1412.11, BUL 1413.11, BUL 1413.30, ESA 952.101, ESA 952.111,
ESA 952.121, ETA 2801-2, ETA 2802, ETA 2803, ETA 2804, ETA 2804-1, ETA 2804-2, ETA 2805, ETA 2806, ETA 2808, ETA 2809,
ETA 2810, ETA 2811, ETA 2812, ETA 2813, ETA 2816-1, ETA 2822, ETA 2822R, ETA 2824, ETA 2824-1, ETA 2824R, ETA 2826,
ETA 2826R, ETA 2828, ETA 2828R, ETA 2829,ETA 2829R, ETA 2830, ETA 2830R, ETA 2831, ETA 2831R, ETA 2832,
ETA 2832R, ETA 2836-2, KF 737, KF 738, KF 739, TIS 3108, ETA 2836-1, ETA 2846, ETA 2893-1, ETA 2893-2,
ETA 2893-3, ETA 2824-2
SELLITA SW200, SW200-1, SW210-1, SW215-1
| |
A/7650
$4.60
|
ETA 2801-2 Screw For # 5110 Train wheel Bridge| | Also used on these ETA Calibers:
2600, 2602, 2603, 2608, 2609, 2801-1, 2801-2, 2804-1, 2804-2, 2816-1, 2821-1. 2821-2. 2824-1, 2824-2, 2824-A2, 2834-1, 2834-2, 2836-1, 2836-2,
Other makes and calibers, Sellita SW200-1, SW210-1, SW215-1, SW220-1, Ben K61D21, Bul 1373.30, Bul 1373.11, Bul 1373.30, Bul 1412.11, Bul 1413.11, Bul 1413.30, JUV 1015, LON 633.5, LON 636.5, LON 639.2, LON 640.1, LON 641.1, TIS 3052, TIS 3103, TIS 3104, TIS 3108
Also the Barrel Bridge Screw Ebauches # 5105, Balance Bridge Screw #5121 and Pallet Bridge Screw for ETA 2801-2, 2804-2, 2824-2, 2836-2, 2834-2, Sellita SW200-1, SW210-1, SW215-1, SW220-1 | |
5110/753
$3.95
|
SELLITA SW210-1 Part #5101 CASE CLAMP SCREW| |
Also for SELLITA SW210-1 and SW220-1 movements
| |
5101/293-SW210
$2.95
|
SELLITA SW200-1 #166 Case Clamp 4.25 mm Length | |
Also for SELLITA SW210-1 and SW220-1
| |
SW200-1-166LONG
$1.80
|
SELLITA SW200-1 #166 Case Clamp 3.4 mm Length | |
Also for SELLITA SW210-1 and SW220-1
| |
SW200-1-166MED
$1.80
|
SELLITA SW200-1 #166 Case Clamp 2.64 mm Length | |
Also for SELLITA SW210-1 and SW220-1
| |
SW200-1-166SHORT
$1.80
|
SELLITA SW200-1 & SW220-1, #1530 Auxiliary Reversing Wheel with Clicks
A/9855
$10.00
|
SELLITA SW200-1Balance Complete, Sold With Balance Bridge Attached| |
This is the Balance Complete #721 Attached to the Balance Bridge #121 and is also for the SELLITA SW220-1.
| |
SW200-1#721-121
$60.00
|
