Otto Frei.
Quality Jewelry Supplies for Generations - Since 1930
Contact UsHome Search for Products About Us

Replacement Pusher Punch Bits & Support for MSA03.654 & 03.656

   
Replacement Pusher Punch Bit "A" for MSA03.654 & 03.656

03.654-A with exterior diameter of 2.95mm and interior diameter of 1.55mm.

MSA03.654-A
$7.60

 


   
Replacement Pusher Punch Bit "B" for MSA03.654 & 03.656

03.654-B with exterior diameter of 2.65mm and interior diameter of 1.55mm.

MSA03.654-B
$7.60

 


   
Replacement Pusher Punch Bit "C" for MSA03.654 & 03.656

03.654-C with exterior diameter of 2.45mm and interior diameter of 1.55mm.

MSA03.654-C
$7.60

 


   
Replacement Pusher Punch Bit "D" for MSA03.654 & 03.656

03.654-D with exterior diameter of 2.15mm and interior diameter of 1.55mm.

MSA03.654-D
$7.60

 


   
Replacement Pusher Punch Bit "E" for MSA03.654 & 03.656

03.654-E with exterior diameter of 1.95mm and interior diameter of 1.45mm.

MSA03.654-E
$7.60

 


   
Replacement Pusher Punch Bit "F" for MSA03.654 & 03.656

03.654-F with exterior diameter of 1.75mm and interior diameter of 1.25mm.

MSA03.654-F
$7.60

 


   
Replacement Pusher Punch Bit "G" for MSA03.654 & 03.656

03.654-G with exterior diameter of 1.55mm and interior diameter of 1.05mm.

MSA03.654-G
$7.60

 


   
Replacement Delrin Unfitting Support Die for MSA03.654 & 03.656

03.654-H is the unfitting support die that is made of delrin material.

MSA03.654-H
$13.50

 


   
Replacement Lower Delrin Fitting Support Die for MSA03.656

MSA03.656-A is the lower fitting support die for MSA036.656 only.

MSA03.656-A
$9.95

 


   
Replacement Upper Delrin Fitting Support Die for MSA03.656

MSA03.656-B is the upper fitting support die for MSA036.656 only.

MSA03.656-B
$9.95

 


   

Horotec Tool for Removing Pushers

Similar to the MSA03.656, but only removes pushers, NOT for fitting pushers. Delivered with 7 stakes (exterior diameters are 2.95mm, 2.65mm, 2.45mm, 2.15mm, 1.95mm, 1.75mm, and 1.55mm) and 1 MSA03.654-H Delrin unfitting support die. The dimensions for this tool is 45x60x7.8 MM.

MSA03.654
$109.00

 

   

Horotec Tool for Fitting and Removing Pushers

It isn't always easy to drive out the pushers without damaging the piece. But with this Horotec Pushers-Press, fitting and removing press-in pushers will be a snap. You can now get the job done of fitting and removing quickly and safely using the right diameter pusher punch bits. Equipped with 7 pusher punch bits and 3 delrin support dies.

Here are the stock number and diameter of the pusher punch bits:
03.654-A with exterior diameter of 2.95mm and interior diameter of 1.55mm
03.654-B with exterior diameter of 2.65mm and interior diameter of 1.55mm
03.654-C with exterior diameter of 2.45mm and interior diameter of 1.55mm
03.654-D with exterior diameter of 2.15mm and interior diameter of 1.55mm
03.654-E with exterior diameter of 1.95mm and interior diameter of 1.45mm
03.654-F with exterior diameter of 1.75mm and interior diameter of 1.25mm
03.654-G with exterior diameter of 1.55mm and interior diameter of 1.05mm
03.654-H is the unfitting support die that is made of delrin material.
03.656-A is the lower fitting support die.
03.656-B is the upper fitting support die.

MSA03.657
$174.95

 


www.ofrei.com
Otto Frei, Watch Parts Since 1930
Customers Entrance
126 2nd St. Oakland, California 94607
Mailing Address: PO BOX 796, Oakland Ca. 94604
Freight Shipment Address: 119 3rd St. Oakland Ca. 94607 USA


Home   |  About Us   |  Specials   |  Contact Us   |  Search

Click here to send email

For stock checks on watch parts not listed on the site please call the watch material department at 510-832-0355 ext 2., Monday to Friday 9 AM to 5 PM Pacific Standard Time Zone.
Stock Checks For Watch Movement & Watch Case Parts

Security/Privacy/Return Policy

United States
510.832.0355 EXT. 2
800.900.3734 (fax)

International
510.832.0355 EXT. 2
510.834.6217 (fax)