Hairspring Tools

For adjusting the beat without removing the hairspring from the collet. With this tool it is also possible to adjust the balance staff endshake by raising a burr under the cock.

FB-2840
$239.00
 

This tool allows installation of balance spring collets on the balance shaft with one end, and precise rotation of the collet with the other end. The hole diameter (to accomodate the balance shaft) is 0.70 millimeters on this (G) part. Available in other sizes, see below. These tools make adjustment of beat as simple as possible and are worth investing in.

FB-234
$36.95
 

Slip movement supplied with one .75 mm high-speed steel, oversized shank twist drill.

FB-718
$36.30
 

A deluxe high quality Bergeon assortment of levers for lifting hands and for removeing, turning and setting hairspring collets. Contain 12 pieces in all, collet tool P & G, broaches for hairsprings #30015-P & 30015-G, lever pairs # 30013 & 30014 and large hand lever pairs #'s 30010 & 30011.

FB-760
$310.00.00
 

This Bergeon 5430 set of two hairspring collet tools is useful for rotating the collet on the balance staff, as well as a variety of other tasks. This is a useful set and is a recommended tool for the AWCI course Basic Watch Repair as levers for hands.

FB-773
$45.90
 

Bergeon 30131 for wrist watches

FB-754
$79.95
 

Used to cut hairsprings and other soft wires. Bergeon pliers 6353-170 have been discontinued by Bergeon

FB-1012

Width of levers is 1.7 mm, 0.2 mm larger than FB-773, which is 1.5 mm

30013
$49.50
 

Tool with holes for balances in nickel-plated brass and is 35 mm in diameter.

FB-130
$37.50
 

The rounding part of the tool is jewelled and should be used with a lubricant. I've heard others say that this tool can be used with Diamantine or similar product to round the tips of balance pivots.

5482
$49.95
 

With glass top and Chromium-plated. Center hole is 3.5 mm in diameter.

30105
$69.50
 

Just slip the cock over the pin tip with the balanced still attached. A balance tack is a fast and simple holder of collet that everyone should have.

FB-105
$15.25
 

Set contains 3 staff removing punches (.10, .15, 20mm), one center punch, 3 heeled bushes (.90, 1.10, 1.40mm), on a wooden base.

FB-735
$458.00
 

Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. There are 12 different sizes: 1856-A (0.28 mm), 1856-B (0.30 mm), 1856-C (0.32 mm), 1856-D (0.35 mm), 1856-E (0.38 mm), 1856-F (0.40 mm), 1856-G (0.42 mm), 1856-H (0.45 mm), 1856-I (0.48 mm), 1856-J (0.50 mm), 1856-K (0.52 mm), and 1856-L (0.55 mm).

BERG-4055
$299.95
 

Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.28 mm.

1856-A
$31.65
 

Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.30 mm.

1856-B
$31.65
 

Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.32 mm.

1856-C
$31.65
 

Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.35 mm.

1856-D
$31.65
 

Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.38 mm.

1856-E
$31.65
 

Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.40 mm.

1856-F
$31.65
 

Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.42 mm.

1856-G
$31.65
 

Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.45 mm.

1856-H
$31.65
 

Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.48 mm.

1856-I
$31.65
 

Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.50 mm.

1856-J
$31.65
 

Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.52 mm.

1856-K
$31.65
 

Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.55 mm.

1856-L
$31.65
 

MSA03.101-05
$17.90
 

MSA03.102-11
$29.00
 

Has small fork shaped tip for removing the stud block. Overall length: 2.25 inches.

AF-015600
$29.80
 

Has small opening at the tip for adjusting the regulator pins. Overall length: 2.25 inches.

AF-015595
$29.80
 

AF-185.382
$44.00