Bench Top Accessories

Very fine quality, Bergeon vise, width of jaws 45 mm. Only the fixing plate is permanently screwed to the bench. The vise can be set up or removed in a few seconds.

FB-750
$226.00
 

Stainless Steel vise plate for the FB-750.

BERG-2021-A
$29.50
 

Made in chromium-plated brass, with grooves to keep it parallel for another gripping device. Interchangable plates of hardened, rectified steel. Width of plates: 15.5 mm. Capacity: 0-15 mm. Depth: 9 mm. Size: 15x15x76 mm.

BERG-6876
$273.00
 

This handy Bergeon gauge should be on every watchmakers bench. Now you can measure the stem size, crown tap, crown diameter, crown opening, case tube diameter, and strap lug width with one signle tool.

FB-115
$47.80
 

Bergeon bench mat, standard green does not reflex light, has a sexlf-adhesive back. Rubber, so parts don't bounce or easily roll off the mat. 350 x 250 x 2 mm (13 3/4" x 9 13/16" x 1/16")

FB-116
$39.50
 

Horotec bench mat, standard green does not reflex light, has a self-adhesive back. Rubber, so parts don't bounce or easily roll off the mat. Exactly the same bench mat as the Bergeon Bench Mat, except that there is no Logo. 350 x 250 x 2 mm (13 3/4" x 9 13/16" x 1/16")

MSA 24.200
$29.60
 

Like the Bergeon mat, except a little bit more green and without the self-adhesive back. 350 x 250 x 2 mm (13 3/4" x 9 13/16" x 1/16")

AF Bench Pad
$15.95
 

Has a deeper shade of green and slightly thicker than the other bench mats. 350 x 250 x 2 mm (13 3/4" x 9 13/16" x 1/16")

MSA 24.203
$11.80
 

Self adhesive. Prevents tools from rolling on the work bench. Black in color. Size: 100mm x 150mm.

AF 182.575
$10.80
 

Self adhesive. Prevents tools from rolling on the work bench. Black in color. Size: 180mm x 300mm.

AF 182.576
$21.60
 

High Quality, Large diameter 5.11" (130mm) magnifying lens. 1.75X magnification. Rimless lens provides a comfortable uninterrupted view. Long and adjustable 18.11" (460mm) gooseneck flexible arm enables the user to adjust the lens to the most comfortable working position. Easy to use spring clamp allows for quick and easy attachment onto most work benches, desks, and table.

FB-29003
$15.95
 

Simply apply & heat to fill cracks and clips on enamel dials.

FB-120
Temporarily out of stock.

Sometimes the case back does not screw off or snap off and the only way to gain entrance to the watch movement is thru the crystal. The watch would then have what is know as a two-piece stem and crown and after you removed the crown you just insert this pump into the hole and pump away until the plastic crystal pops off the case. To Remove crystals quickly and safely. Available with 3 heads: diameter at 1.60, 2.00, and 2.50mm. 1 key for removing the half-stem with the crown.

BERG-5011
$135.50
 

Assorted tapered pin for cases.

10007
$42.95
 

The rounding part of the tool is jewelled and should be used with a lubricant. I've heard others say that this tool can be used with Diamantine or similar product to round the tips of balance pivots.

5482
$49.95
 

Remover dents from Pocket Watch and other cases with ease.

DR-905
$8.95
 

Driver opener, on wooden stand with 12 assorted driver brides.

BERG-30090
$159.95
 

This is the perfect tool for a simple extraction of two parts winding stems. Tool has a plastic body which cannot scratch the watch case. The length can be adjusted by the screw. Can also be used for the lag of the crown to set hour or date.

BERG-6889
$159.00
 

Case Cushion with a hollowed center, covered with stamoid, non-scratching for glass. Held together by a nickelled brass ring. For casing and uncasing movements, opening & closing cases and giving protection while making regulating corrections.

FB-810
$33.95
 

Made by Bergeon under the request of Rolex®, who were concerned that the metal ring of the old cushion could somehow scratch the case.

5394-P
$21.50
 

Same as the 5394-P but with a 80 mm diameter to hold large cases.

BERG-5394-PG
$31.50
 

This Case Cushion is wrapped with a metal ring. The extra large 76 mm diameter (3") can help when working on the ever larger monster watch.

MSA 09.304
$19.95
 

This Case Cushion is wrapped around with a plastic ring. The diameter of this piece is 56.2mm.

MSA 09.303
$17.95
 

The diameter of this piece is 24MM.

AF-167.650-24
$26.50
 

The diameter of this piece is 30MM.

AF-167.650-30
$26.50
 

The diameter of this piece is 40MM.

AF-167.650-40
$26.50
 

This inexpensive plastic dust cover and tray may look like a cheese tray, but for the watchmaker, it means clean parts. The segmented bottom separates groups of parts.

FB-117
$5.45
 

The Cube cabinet is made of solid aluminum measuring 150 x 150 x 150 mm. There are various models with a combination of different draws. This model comes with 6 extremely compact drawers with 3 draws containing nine plastic compartment slots and 3 draws with three plastic compartment trays. It is built to organize small tools and other instruments used daily by watchmakers or micro-technicians. With the 7014-N-V2 Cube cabinet on your bench top, you dont have to waste time searching for that small parts or tool. Attractive design that keeps you organize!

BERG-7014-N-V2
$198.00
 

The main catalog of professional material for the watchmaker and the jeweler is a guide, a working instrument with a lot of ideas. 20,000 references 1'200 pages 4'700 pictures 800 technical drawings 4 languages (French, German, English, Spanish)

FB-Bergeon Catalog
$98.00
 

High Precision. Brass nickel-plated and polished. Length of joint 65 mm, Depth 3.5 - 13 mm, handles length of staff up to 25 mm.

BERG-4291
$749.00
 

It holds individual charts, patterns, magazines, leaflets and books. Folds open instantly and closes flat to 8" x 11" for convenient storage and portability. Includes a seperate metal magnetic board and magnets to precisely and easily follow charts. Elastic page holder keeps books opened and papers secure

GS-X3001
$19.95
 

Gauge measures in watch lignes sizes and millimeters on one side, while the other side gives American watch movement sizes.

MOVEMENT-GAUGE
$3.95
 

Tester in the form of a pencil that is easy and simple to use. It is not necessary to unsolder and take out the quartz. Touch the two quartz contacts on the movement with the two prongs of the tester. If the movement starts to move, then the quartz is defective and needs replacing.

BERG-6437
$33.50
 

For those who don't want to scratch and damage their dials while removing hands, this Bergeon dial protector is the tool to use. It's made of resistant synthetic material. Thickness of 0.15 mm. Color is gray with Otto Frei Logo.

BERG-6938
Regular Price $1.50, On Sale Now Only $1.38
 

Quantity	1 - 9	10 - 99	100+
Price	$1.50	$1.20	$1.00
On Sale!	$1.38	$1.08	$0.91

Now you have a chance to Purchase practically an industry first! A watch parts supply catalog from one of the leading Supply Houses of Switzerland. As a Distributor of Horotec Products we are please to be able to offer the Horotec Watch Parts Service Catalog 2007 and all the 3,200 products inside this catalog to our customers. Having at your fingertips a catalog with not only the dimensions but actual size color catalog of crowns, pushers, hands and much more allows you to order parts like never before. All 3,200 Horotec Items Inside Catalog Are Available From Otto Frei, Oakland Ca. USA

HOROTEC-CAT-2007
$6.00