Miscellaneous 1

Sometimes the case back does not screw off or snap off and the only way to gain entrance to the watch movement is thru the crystal. The watch would then have what is know as a two-piece stem and crown and after you removed the crown you just insert this pump into the hole and pump away until the plastic crystal pops off the case. To Remove crystals quickly and safely. Available with 3 heads: diameter at 1.60, 2.00, and 2.50mm. 1 key for removing the half-stem with the crown.

BERG-5011
$135.50
 

Seven different notches for closing collets.

BERG-3007
$119.00
 

Slip movement supplied with one .75 mm high-speed steel, oversized shank twist drill.

FB-718
$36.30
 

Bergeon set includes six double-ended cutters. Perfect to enlarging holes, clean screw heads, clear dial feet, and doing beveling.

FB-766
$235.00
 

Great for polishing pivots, pinions and much more. Five differnt shapes are available: Flat 3 mm, Flat 4 mm, 1/2 Round shape, Crossing and this Round Pointed.

30401-3
$139.00
 

Great for polishing pivots, pinions and much more. Five differnt shapes are available: Flat 3 mm, Flat 4 mm, Round Pointed, Crossing and this 1/2 Round shape.

30401-4
$168.50
 

Great for polishing pivots, pinions and much more. Five differnt shapes are available: Flat 4 mm, 1/2 Round shape, Round Pointed, Crossing and this Flat 3 mm.

30401-6
$146.90
 

High Precision. Brass nickel-plated and polished. Length of joint 65 mm, Depth 3.5 - 13 mm, handles length of staff up to 25 mm.

BERG-4291
$749.00
 

This useful Bergeon tool for removing broken screws in a plate or bridge. The broken shaft of the screw.The tool grips the broken shaff of the screw from above and below. Supplied with 1 and 0.8 mm tips (two each), 0.4 through 0.7 tips are also available.

FB-2832
$80.50
 

Priced per piece.

30209-A
$12.50
 

The FB-2832 Bergeon Screw Extractor is supplied with two of this size broaches.

30209-C
$12.50
 

Bergeon Crown Winder for Mechanical Watches number 30409D, for 2-4 mm crowns. Great for people who can no longer wind crowns without some discomfort.

FB-2879
$32.50
 

Bergeon Crown Winder for Mechanical Watches number 30409A, for 3-5 mm crowns. Great for people who can no longer wind crowns without some discomfort.

FB-2880
$32.50
 

Removes excess solder from the base of the dial feet , which keep the dial from fitting.

BERG-30511
$97.50
 

This handy tool is used to flatten the end of the pallet lever guard pin (safety pin)during adjustments to the escapement. This isn't a tool you're going to use every day, but it's a convenience when you need it.

FB-2830
$59.50
 

Bergeon 1616 pin extractor set in a wood box. Set of 6 interchangable tips number 6745-G (sizes: 0.40, 0.60, 0.80, 1.0, 1.5, and 2.0 mm) in a wooden box. The Bergeon replacement pin punches 6745-G and the Minathor tool holder 1550-0 can be used as refills for this tool.

FB-503
$56.50
 

This solution is used with the Plating Pen, FB-1111. Keep the solution absolutely free of contamination to avoid discoloration of the plated surface. The solution contains sulfuric acid and should be used carefully and with good ventiliation.

FB-1111
$27.00
 

For screw diameters from 0.50 to 1.60 millimeters.

30615-03
$1,210.00
 

FB-708
$995.00
 

A wonderful tool that sure looks good. Allows the pivots to be straightened without breaking due to a control device as well as a screw fitted with a stop. Bergeon reference #30350-D.

FB-743
$196.00
 

This beautifully-made saw frame accomodates blades up to five inches (130 mm) and provides a depth of 2 3/4 inches (70 mm). The three quick release locks provides accurate, fast, secure adjustment, and the padded rubber handle a comfortable grip. This is an elegant, lifetime solution for precise cutting tasks. Blades in various cuts are sold separately.

FB-2800
$14.50
 

Bergeon 30131 for wrist watches. 300 pieces.

FB-754
$79.95
 

Bergeon 30132 timing washer assortment for pocket watches. 300 pieces.

BERG-30132
$79.95
 

Driver opener, on wooden stand with 12 assorted driver brides.

BERG-30090
$159.95
 

This is the perfect tool for a simple extraction of two parts winding stems. Tool has a plastic body which cannot scratch the watch case. The length can be adjusted by the screw. Can also be used for the lag of the crown to set hour or date.

BERG-6889
$159.00
 

This pliers-type cannon-pinion tightener is one quick way to increase friction on the center wheel pinion. With screw regulated opening system.

FB-713
$75.00
 

For small and large watches, adaptable to all sizes

FB-741
$82.50
 

Can be used for movements without case only. Length 70mm. Diameter 4mm. Knurled handle. According to the nature of the winding stem use male or female tool. Push the plastic guide backward, then insert the tool laterally into the winding stem. Release the plastic guide again.

5727-MF
$69.95
 

Capacity: 0 to 0.50 mm.

BERG-1678
$209.00
 

Used for sanding precious metals.

FB-956
$1.20
 

Bergeon Screw Tip Finisher with 3 lanterns and wooden handle. Use for rounding off and polishing screw ends. The 3 different lanterns are made to fit screw threads with diameter .40, .60, and .80 mm. The lanterns hold the screw thread tightly, so that it won't move around while you work on it. It is very difficult or even impossible to round off and polish screw ends without this tool; giving that the part is so tiny. Forget the hassle and get this tool.

BERG-2003
$61.00
 

Has small fork shaped tip for removing the stud block. Overall length: 2.25 inches.

AF-015600
$29.80
 

Has small opening at the tip for adjusting the regulator pins. Overall length: 2.25 inches.

AF-015595
$29.80
 

All the pivots of the assortment are interchangeable between themselves for end-mill number 1 to 12 plus 16 and number 13 to 15. Use with broach 30007-C that is included. Conical shank 2%. Delivered in wooden case.

BERG-30007-MD
$1,065.00