Case Holders, Watch

This is the standard case holder in the industry, and is the best by far. Made of a hard nylon material that will not break, and since it is nylon, it will not mark the case. The four pins are adjustable to hold a small ladies cases to all but the most monster sizes of the men's cases, which are over 44 mm in diameter. This will hold cases up to 44 mm diameter. Once you have the case locked into the Bergeon 5090 case holder, you now have to tighten the 5090 in a your shop vise. Locked in place in your shop vice you can now use two hands when using a case wrench to open the case back.

FB-200
$53.50
 

Place in your bench vise and hold cases secure, while opening waterproof case backs. Very popular case holder found in many shops and if used by the right person is a very good tool for the price. The watch case is held in place by the nylon plugs and does not make contact with the aluminum. This is one of the better watch repair tools made in India.

CWR175.00
$8.98
 

This Jaxa case holder is for the really big ones. As you can see, it can hold a much larger watch than the one shown in the photo. If the big ones cross your bench, then you know you need one of these. You can put cases up to 66 mm in diameter in this holder and if you had to hold an 18 mm diameter case, well you can still use this extra holder.

FB-202
$114.50
 

Each chuck is adjusted by its own knob, which allows a firm hold and whatever you need to get a firm hold on. Place it in a vice or use it on your bench top. The chucks are the same hard nylon used in the Jaxa holders while the body is made of steel. Will hold cases up to 43 mm in diameter.

FB-232
$108.95
 

MSA-08.002
$94.50
 

For use when opening screw back cases. Rubber suction base hold firm and is ideal for desk/counter top use. Can hold cases from 22 - 70 mm.

S-212
$98.89
 

This Swiss-made Bergeon case holder is for watches with lug widths of 9, 10, 11, 12, and 14 mm. Held in bench vice. made of plastic material which cannot scratch the cases.

FB-203
$37.40
 

Everybody needs a case holder which is placed in the jaws of your case vise. This Beregon case holder is very well made, and holds both ladies and most gents watches.

FB-205
$26.50
 

Plastic jaws, spring loaded with locking nut.

180.382
$9.90
 

Fits in a bench vice, holds all types of cases while removing backs. It is reversible. The bottom side case holder can be used as a soft jaw vice insert like the Bergeon FB-2810 brass model.

MV-300
$11.60
 

A very inexpensive piece. It has been around for many many years. Watchmakers have been using this item for a very long time. It's a nice tool to have around.

159.086
$5.95
 

Case Cushion with a hollowed center, covered with stamoid, non-scratching for glass. Held together by a nickelled brass ring. For casing and uncasing movements, opening & closing cases and giving protection while making regulating corrections.

FB-810
$33.95
 

Made by Bergeon under the request of Rolex®, who were concerned that the metal ring of the old cushion could somehow scratch the case.

5394-P
$21.50
 

Same as the 5394-P but with a 80 mm diameter to hold large cases.

BERG-5394-PG
$31.50
 

This Case Cushion is wrapped with a metal ring. The extra large 76 mm diameter (3") can help when working on the ever larger monster watch.

MSA 09.304
$19.95
 

This Case Cushion is wrapped around with a plastic ring. The diameter of this piece is 56.2mm.

MSA 09.303
$17.95
 

The diameter of this piece is 24MM.

AF-167.650-24
$26.50
 

The diameter of this piece is 30MM.

AF-167.650-30
$26.50
 

The diameter of this piece is 40MM.

AF-167.650-40
$26.50
 

For use on integrated bands. Helps holding band apart so it won't obstruct your view, allowing you to use both hands while working on the piece.

MSA 10.007
$48.90